Abstract:Potential applications at elevated temperatures require shape memory alloys (SMAs) to possess high transformation temperature, excellent shape recovery ability and thermal/functional stability. The present study investigated the influences of Dy addition on the microstructural characterization, functional behavior and possible deformation mechanisms in high temperature Ni54Mn25Ga21 SMAs. The results indicated that adequate Dy addition contributed to a desirable tradeoff among compressive strength, ductility and functional performance. Ni54Mn25Ga20.9Dy0.1 alloy showed the highest shape memory recoverable strain due to the improvement of mechanical properties and formation of small Dy-rich precipitates. Simultaneously, an obvious pseudoelasticity was observed over a wide temperature range with a maximum recoverable strain of 3.74% at 320°C in this alloy. All the Dy-containing alloys exhibited high thermal cyclic stability and quite low thermal hysteresis. However, it was revealed that a complicated and abnormal relationship between thermal hysteresis and the middle eigenvalue λ2 existed for the investigated alloys with a lattice transition from cubic to tetragonal. Calculated results based on energy minimization theory revealed that both the transformation strain and critical stress for inducing martensitic transformation varied with crystallographic orientations. The detwinning of pre-existing (112) compound twins and formation of (112) deformation twins were the dominant deformation mechanisms of martensite, which were highly compatible with the macroscopical recoverable strain. The present study provided valuable insights for developing high-performance multifunctional shape memory alloys for high temperature applications.

Effect of Dy Addition on the Microstructure and Martensitic Transformation of a Ni-rich TiNi Shape Memory Alloy

Effect of Rare Earth Dy Addition on Microstructure and Martensitic Transformation of Polycrystalline Ni50Mn29Ga21−xDyx Ferromagnetic Shape Memory Alloys

Effect of Y Addition on Microstructure and Martensitic Transformation of a Ni-rich Ti–Ni Shape Memory Alloy

Effect Of Nd Addition On The Microstructure And Martensitic Transformation Of Ni-Ti Shape Memory Alloys

Study of the Precipitate Phases and Martensitic Transformation in Quaternary Heusler Alloys of NiMnGaDy

Investigation on Ce Addition on Microstructure and Martensitic Transformation of a Ti51Ni49 Shape Memory Alloy

Microstructure and Martensitic Transformation of Ni–Mn–Ga–Ti Ferromagnetic Shape Memory Alloys

Investigation on Ce Addition on Microstructure and Martensitic Transformation of a Ti<sub>51</sub>Ni<sub>49</sub> Shape Memory Alloy

Martensitic Transformation and Magnetic Properties of Ti-doped NiCoMnSn Shape Memory Alloy

Recent Electron Microscopy Results on Micro- and Nanostructured Ni-Ti-(X) Shape Memory Alloys

Effect of Y on Martensitic Transformation and Mechanical Properties of NiMnSn High Temperature Shape Memory Alloy

Martensitic Transformation of Ti-Ni-Gd Shape Memory Alloy

Microstructural Characterization and Functional Performance of Ni54Mn25Ga21-xDyx High-Temperature Shape Memory Alloys

Effect of Ce Addition on Martensitic Transformation Behavior of TiNi Shape Memory Alloys

Effect of the Ti content on microstructure and properties of Ni53Mn23.5Ga23.5-xTix ferromagnetic shape memory alloy

An in Situ TEM Study of the Size Effect on the Thermally Induced Martensitic Transformation in Nanoscale NiTi Shape Memory Alloy

Martensitic Transformation and Shape Memory Effect of Ti–49at.%Ni Alloys

The Microstructure and Martensitic Transformation of (ti49.3ni50.7)1−xgdx Shape Memory Alloys

Effect of Dy Addition on Microstructure and Mechanical Properties of Mg-4Y-3Nd-0.4Zr Alloy

Microstructural Characterization, Functional Behavior and Deformation Mechanism of Ni&gt;sub&gt;54Mn <sub>25</sub>Ga <sub>21-x</sub>Dy <sub>x</sub> High Temperature Shape Memory Alloys with Low Thermal Hysteresis

Investigation on Microstructure and Phase Transformation of La Added Ti49.3ni50.7 Shape Memory Alloy