Abstract:The development of high performance metal matrix composites (MMCs) requires understanding the complex effects of heterogeneous microstructure on the mechanical properties and failure mechanisms. Experimental observations [1] indicated that fine reinforcement particles increased the composite strengthen and work hardening capacity. A number of dislocation models [1,2] have been proposed in a few decades to predict the particle size dependence. Recently, Gao et al. [3] proposed a mechanism-based theory of strain gradient plasticity (MSG) to illustrate the plastic strain and strain gradient which is dissimilar to the phenomenological strain gradient plasticity theories [4,5]. Gao and Huang [6] developed a Taylor-based nonlocal theory (TNT) of plasticity to account for the size dependence of plastic deformation on the strengthening of particle reinforced composites. Qu et al. [7] have extended the conventional theory of mechanism-based strain gradient plasticity (CMSG) established from the Taylor dislocation model to explain the effect of quench hardening and account for particle/matrix interface debonding via the cohesive zone model (CZM). The numerical results agree well with Lloyd’s experimental data [1]. Nan and Clarke [8] extended the effective medium approach (EMA) to demonstrate the influence of particle size and size distribution as well as particle fracturing on the deformation behavior of MMCs. Tohgo et al. [9] extended the incremental damage model of the MMCs by introducing the particle size effects using Nan–Clarke’s simple method. This paper presents the development of a 2D microstructure based finite element model to investigate the effect of particle size on the deformation behavior of the SiCp/Al composites. In the simulation, the two-dimensional randomly distributed multiparticles unit cell model is used. For modeling the matrix behavior of the composites, the Taylor-based nonlocal theory of plasticity is used. The model is enhanced by including contribution of interfacial decohesion and particle fracture damage mechanisms. The simulation provides the stress–strain field of composites during tensile deformation, and calculates the stress–strain curves of the composites with different particle size. 2. NUMERICAL METHODS

Experimental and numerical studies of the effect of particle size on the deformation behavior of the metal matrix composites

A Physically-Based Plastic Constitutive Model Considering Nanoparticle Cluster Effect for Metal Matrix Nanocomposites

Simulating Size and Volume Fraction-Dependent Strength and Ductility of Nanotwinned Composite Copper

Micromechanical Simulation of Fracture Behavior of Nanostructured Metals with Bimodal Grain Size Distribution

Plastic deformation and fracture behaviors in particle-reinforced aluminum composites: A numerical approach using an enhanced finite element model

An enhanced fem model on the deformation behavior of sic / aluminum composites

A Study of Particle Size Effect and Interface Fracture in Aluminum Alloy Composite Via an Extended Conventional Theory of Mechanism-Based Strain-Gradient Plasticity

A Three-Dimensional Strain Gradient Plasticity Analysis of Particle Size Effect in Composite Materials

Microstructure-based simulation on the mechanical behavior of particle reinforced metal matrix composites with varying particle characteristics

The Influence of the Volume Fraction of Ceramic Particles on the Plastic Strain Localization and Fracture of Metal Matrix Composites. Computational Analysis

The Mean Free Path of Dislocations in Nanoparticle and Nanorod Reinforced Metal Composites and Implication for Strengthening Mechanisms

On effect of particle size distribution on the elastic/plastic deformation of metal matrix composites

Numerical investigations on the hybrid effect and deformation mechanism of TiB2p and TiBw reinforced Cu composites prepared by in-situ mixing casting

Experimental verification and numerical analysis on plastic deformation and mechanical properties of the in-situ TiB2 homogeneous composites and TiB2/Cu network composites prepared by powder metallurgy

Crystal plasticity finite element modelling and mechanical deformation mechanism of nanolaminated graphene reinforced metal matrix composites

Localization of deformation and formation of residual stresses in metal-matrix composites

Numerical modeling and failure evolution of microstructure-based in-situ TiB2 and TiC+TiB2 reinforced Cu matrix composites

Effect of particle size on dynamic mechanical behaviors of W particles/Zr-based bulk metallic glass composites

Deformation and fracture of SiCp/Al composites under complex loading conditions: A simulation study

Metal Nanocomposites Reinforced by Ceramic Nanoarchitecture: Exploiting Extrinsic Size Effects for High Mechanical Strength

Effect of Particle Shapes on Effective Strain Gradient of Sic Particle Reinforced Aluminum Composites