Experimental and numerical study on an open-cycle Joule-Thomson cryocooler working at liquid nitrogen temperature
Changxu Qiu,Yunwei Shen,Wubing Miao,Bin Wang,Tongfei Wu,Jiaxu Xia,Anzhuo Liu,Zhihua Gan
DOI: https://doi.org/10.1016/j.applthermaleng.2024.123424
IF: 6.4
2024-05-20
Applied Thermal Engineering
Abstract:Efficient and reliable low-temperature cooling technology is one of the important foundations for effective operation of detection electronic components. With the advantages of no moving parts at low temperature, flexibility and simple structure, the Joule-Thomson (JT) cryocooler working at liquid nitrogen temperature has the potential to be applied in thermal management of electronic components which have higher requirements for cooling capacity and reliability nowadays. In this research, the thermodynamic process and thermodynamic models of a JT cryocooler was systematically studied with the goal of obtaining 10 W cooling capacity at liquid nitrogen temperature to meet the significant refrigeration needs of electronic devices. A JT cryocooler working at liquid nitrogen temperature was fabricated and tested based on numerical calculation results. The cooling capacity of 9.68 W @ 83.5 K was obtained at high and low pressure of 10.85 MPa and 0.182 MPa in experiment, respectively and the corresponding mass flow rate was 8.66 × 10 −4 kg/s. Based on experimental results, the accuracy of the heat exchanger and JT orifice thermodynamic models were verified to be reasonable. In terms of high-pressure side outlet temperature and heat exchanger efficiency of the recuperative heat exchanger, the relative deviations between the calculated results and the experimental results were 1.5 K and 1.31 %, respectively. The minimum deviation between the mass flow rate predicted by the JT orifice model and the experimental mass flow rate was only 1.45 %.
energy & fuels,engineering, mechanical,mechanics,thermodynamics