Application of aerobic granular sludge in polishing the UASB effluent.

L L Zhang,B Zhang,Y F Huang,W M Cai
DOI: https://doi.org/10.1080/09593332608618611
IF: 3.475
2005-01-01
Environmental Technology
Abstract:Stable aerobic granules were successfully developed in a sequencing batch reactor (SBR) fed with glucose and sodium acetate as the main carbon sources, and then en they were acclimatized to polish the effluent from an up-flow anaerobic sludge blanket (UASB) reactor. It was found that more than 95% chemical oxygen demand (COD) and 85% suspended solids (SS) in the UASB effluent could be removed by an aerobic granular SBR as a post treatment unit. The performance of the SBR was stable over the whole experimental period. At an organic loading rate (OLR) of 4.5 to 5.4 g 1(-1) d(-1), the acclimatized aerobic granules had an average diameter of 3.5 to 6.0 mm and a minimal settling velocity of 72 in m h(-)1. The biomass concentration in the SBR was as high as 8.4 g (dry weight) 1(-1). This study showed for the first time that aerobic granular sludge in SBR Would be an effective means to polish the effluent from UASB reactor.
What problem does this paper attempt to address?