Abstract:Despite recent advances and improvements in modeling and prediction of the dynamics of the machining process, an efficient machining process is limited due to chatter and instability of machining system. In fact, the machining system contains various kinds of joints, which cause difficulties in dynamics modeling, simulation and prediction. Moreover, the flexible support system results in large deformation and violent vibration of the workpiece when machining, and the thin-walled workpiece easily gives rise to the chatter of the machining system. Therefore, the dynamics of the flexible support system was considered to calculate stability lobe diagram in the modeling of milling process. The whole machining system was regarded as a closed loop composed by the machine tool structures, support, workpiece and machining process. In this paper, the receptance coupling (RC) method was introduced to predict the dynamics of the closed machining system. A milling process was taken for example to predict the chatter limitations using the dynamics of closed model. The mathematical model of the machining system (machine tool structures, spindle, holder and tool), together with the details of joint contacts, was given based on the RC method. The RC model was used to obtain the dynamics of the system, while receptance of the tool point was coupled. Based on the coupling model of the machining system, the depth limitations under different speeds were estimated for the technology parameter optimization in milling process. The response was considered to be the sum of the cutting point and the support system. The flexibility of the support system was considered to be the feedback of the cutting stiffness. By this means, the traditional model was modified to calculate the stability lobe diagram based on the dynamics of the spindle and support system. Furthermore, the milling experiment was carried out to verify the prediction results, and the dominant natural frequencies of receptance at tool point were obtained by modal testing to define the stability lobe diagram. It was found that the chatter results matched well with the stability lobes. It was concluded that the support system with poor stiffness might cause violent chatter especially when the workpiece was thin-walled. The cutting depth limitations of the flexible support system were lower than that of the rigid one. Moreover, this closed model of the machining system is appropriate for the chatter prediction of the flexible support system or thin-walled workpiece, so it is helpful for a better parameter optimization.

Prediction of Dynamic Cutting Force and Regenerative Chatter Stability in Inserted Cutters Milling

Cutting Force Prediction and Analytical Solution of Regenerative Chatter Stability for Helical Milling Operation

Prediction of Chatter Stability in Bull-Nose End Milling of Thin-Walled Cylindrical Parts Using Layered Cutting Force Coefficients

Three-dimensional Chatter Stability Prediction of Milling Based on the Linear and Exponential Cutting Force Model

An Instantaneous Cutting Force Model for Disc Mill Cutter Based on the Machining Blisk-Tunnel of Aero-Engine

Milling Force Model Prediction Considering Tool Runout with Three-Teeth Alternating Disc Cutter

Milling Force Modeling for Disc Milling Cutter of Indexable Three-Sided Inserts Considering Tool Runout

Milling Stability Prediction and Adaptive Chatter Suppression Considering Helix Angle and Bending

A prediction method of cutting force coefficients with helix angle of flat-end cutter and its application in a virtual three-axis milling simulation system

Prediction of chatter stability for multiple-delay milling system under different cutting force models

Modeling of cutting forces in orthogonal turn-milling with round insert cutters

Chatter Prediction for Face Milling Process of Workpieces with Variable Stiffness

Stability Prediction of Milling Process with Closed Machining System Dynamics with Flexible Thin-Walled Workpiece

Dynamic Modeling for Chatter Analysis in Micro-Milling by Integrating Effects of Centrifugal Force, Gyroscopic Moment, and Tool Runout

Research on a Generalized Simulation Algorithm of Cutting Forces Prediction for Inserted Cutters and Its Implementation

Milling Process Simulation for the Variable Pitch Cutter Based on an Integrated Process-Machine Model

Dynamics Modeling and Simultaneous Identification of Force Coefficients for Variable Pitch Bull-Nose Cutter Milling Considering Process Damping and Cutter Runout

Study on Dynamic Simulation and Cutting Parameters Optimization on Complex Cutting Conditions Milling Process

Chatter Stability Prediction of Milling Considering Nonlinearities

Predictive modeling of chatter stability considering force-induced deformation effect in milling thin-walled parts

State Dependent Regenerative Stability and Surface Location Error in Peripheral Milling of Thin-Walled Parts