Leaching Characteristics and Impact Factors of Heavy Metals on the Flying Ash Due to the Urban Garbage Incineration

Ting-quan PEI,Li-ao WANG,Shi-min DING,Chuan HUANG,Zhen-xia SONG,Hua-li WANG

DOI: https://doi.org/10.3969/j.issn.1009-6094.2008.04.007

2008-01-01

Abstract:The present paper is aimed to introduce our research on the influence of heavy metals from the urban garbage incineration on the flying ash due in the air in Chongqing with the purpose to analyze and find the relationship between the initial pH,liquid to solid ratio(L/S),the extraction time and leaching characteristics of heavy metals in the fly ash.The results of our investigation indicate that the leaching of heavy metals proves to be weak alkaline,whose leaching initial pH don't exceed corrosion standard(pH≥12.5 or ≤2.0),therefore,the fly ash isn't corrosive.But the leaching concentration of Pb(5.19 mg/L) exceeds the Chinese toxicity standard(5.00 mg/L).Therefore,the fly ash has to be considered as a kind of hazardous waste.When BCR method is adopted to specify the samples of leaching,it can be found that,in the residual fraction,mainly exist such ingredients as Cr,Ni and Mn,with Cd,Cu existing in the acid soluble.So far as the leaching amount of heavy metals is concerned,they are mainly related to pH value,which tend to decrease with the increase of initial pH value.In addition,it has proved that the leaching amount of heavy metals except Ni reaches the maximum value when the pH value is 1.All in all,the leaching amount of the heavy metals in fly ash tends to increase with the increase of L/S and extraction time.Moreover,the leaching amount of the heavy metals except Cd reaches the maximum value when extraction time is 24 hours.Thus,it can be seen that the above investigation and analysis help to lay a basic foundation for pollution prevention and reasonable disposal for fly ash from the urban waste incineration.