Abstract:Basic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD). The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are complex and its properties are variable. The results of XRF and SEM revealed that the major elements (>10000 mg/kg, listed in decreasing order of abundance) in fly ash are O, Ca, Cl, Si, S, K, Na, Al, Fe and Zn. These elements account for 93% to 97%, and the content of Cl ranges from 6.93% to 29.18 %, while that of SiO2 does from 4.48% to 24.84%. The minor elements (1000 to 10000 mg/kg) include Cr, Cu and Pb. Primary heavy metals in fly ash include Zn, Pb, Cr, Cu etc. According to standard leaching test, heavy metal leaching levels vary from 0 to 163.10 mg/L (Pb) and from 0.049 to 164.90 mg/L (Zn), mostly exceeding the Chinese Identification Standard for hazardous wastes. Morphology of fly ash is irregular, with both amorphous structures and polycrystalline aggregates. Further research showed that heavy metals were volatilized at a high furnace temperature, condensed when cooling down during the post-furnace system and captured at air pollution control systems. Generally, heavy metals are mainly present in the forms of aerosol particulates or tiny particulates enriched on surfaces of fly ash particles. The properties of fly ash are greatly influenced by the treatment capacities of incinerators or the variation of waste retention time in chamber. Fly ash from combustors of larger capacities generally has higher contents of volatile component and higher leaching toxicity, while those of smaller capacities often produce fly ash containing higher levels of nonvolatile components and has lower toxicity. The content of heavy metals and leaching toxicity maybe have no convincing correlation, and high alkali content of CaO greatly contribute to leaching toxicity of heavy metal and acid neutralization capacity against acid rain.

Leaching morphology characteristics and environmental risk assessment of 13 hazardous trace elements from municipal solid waste incineration fly ash

Content, Mobility and Transfer Behavior of Heavy Metals in Mswi Bottom Ash in Zhejiang Province, China

Identification of Heavy Metal Leaching Patterns in Municipal Solid Waste Incineration Fly Ash Based on an Explainable Machine Learning Approach.

Chemical and Geotechnical Properties of Solidified/stabilized MSWI Fly Ash Disposed at a Landfill in China

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Investigation of controlling factors on toxic metal leaching behavior in municipal solid wastes incineration fly ash

Leaching Characteristics of Heavy Metals in Municipal Solid Waste Incinerator Fly Ash

Morphochemical investigation on the enrichment and transformation of hazardous elements in ash from waste incineration plants

Leaching behavior and comprehensive toxicity evaluation of heavy metals in MSWI fly ash from grate and fluidized bed incinerators using various leaching methods: A comparative study

Seasonal Variation of the Mobility and Toxicity of Metals in Beijing’s Municipal Solid Waste Incineration Fly Ash

Municipal solid waste (MSW) incineration fly ash as an important source of heavy metal pollution in China

Ecological Risk Assessment and Influencing Factors of Heavy-Metal Leaching From Coal-Based Solid Waste Fly Ash

Trace Pollutant in MSW Incinerator Fly Ash:Heavy Metals and Dioxins

Leaching of Heavy Metals from MSWI Fly Ash: Experiments Vs. Simulation

Chemical Speciation and Mobility of Heavy Metals in Municipal Solid Waste Incinerator Fly Ash

Release dynamics, risk evolution and driving mechanisms of heavy metals in superalkaline fly ash co-disposed by MSW landfill

Assessment of heavy metals mobility and correlative recovery and decontamination from MSWI fly ash: Mechanism and hydrometallurgical process evaluation

Investigation of Basic Properties of Fly Ash from Urban Waste Incinerators in China.

A STUDY ON BASIC CHARACTERISTICS OF FLY ASH FROM MUNICIPAL SOLID WASTE INCINERATOR IN SHENZHEN

Influence of intruding organic acids on the leaching dynamics of heavy metals in stabilized MSWI fly ash from landfills under various percolation conditions

Effects and mechanism of the conditions of sintering on heavy metal leaching characteristic in municipal solid waste incineration fly ash