Abstract:Based on global initiatives such as the clean energy transition and the development of renewable energy, the pumped storage power station has become a new and significant way of energy storage and regulation, and its construction environment is more complex than that of a traditional reservoir. In particular, the stability of the rock strata in the underground reservoirs is affected by the seepage pressure and rock stress, which presents some challenges in achieving engineering safety and stability. Using the advantages of the numerical simulation method in dealing deal with nonlinear problems in engineering stability, in this study, the stability of the underground reservoir of the Shidangshan (SDS) pumped storage power station was numerically calculated and quantitatively analyzed based on fluid-structure coupling theory, providing an important reference for the safe operation and management of the underground reservoir. First, using the COMSOL software, a suitable mechanical model was created in accordance with the geological structure and project characteristics of the underground reservoir. Next, the characteristics of the stress field, displacement field, and seepage field after excavation of the underground reservoir were simulated in light of the seepage effect of groundwater on the nearby rock of the underground reservoir. Finally, based on the construction specifications and Molar-Coulomb criterion, a thorough evaluation of the stability of the underground reservoir was performed through simulation of the filling and discharge conditions and anti-seepage strengthening measures. The findings demonstrate that the numerical simulation results have a certain level of reliability and are in accordance with the stress measured in the project area. The underground reservoir excavation resulted in a maximum displacement value of the rock mass around the caverns of 3.56 mm in a typical section, and the safety coefficient of the parts, as determined using the Molar-Coulomb criterion, was higher than 1, indicating that the project as a whole is in a stable state.

Numerical Simulation of Lightning Protection against Intruding Wave in Pumped-storage Power Station

Research on Lightning Protection of 220kv Substation with Long Cable Inlet Wire

The analysis of lightning intruding wave overvoltage along 330kV transmission line in 750kV Yinchuandong substation

Research on lightning intruding waves in 220 kV GIS substation

Simulated Calculation and Analysis of Lightning Performance of UHV A.C. Transmission Line

Simulation on lightning overvoltage of ±800kV converter station

Simulating Analysis Lightning Invasion Wave in a 35kV Substation

Behavior Modeling of Lightning Overvoltage and MOA-based Protection for Floating Ground SST

Numerical Electromagnetic Analysis of Lightning Protection System over Lossy Ground

Design of Multi-Surge Impedance Model for Ultra-High Transmission Tower and Analysis Onits Transient Characteristic Caused by Lightning Stroke

Research of the Lightning Protection Performance for 220 Kv Double-Circuit Transmission Line

Transient Simulation for a Pumped Storage Power Plant Considering Pressure Pulsation Based on Field Test

Single pulse lightning and multiple lightning intrusion overvoltage in 500 kV GIS substation

Study on Lightning Protection of Large‐Scale Photovoltaic Power Station by Spiral Multiple Pair Blowing Units

Lightning protection design of solar photovoltaic systems: Methodology and guidelines

Planning Pumped Storage Capacity for Wind Power Integration

Simulation of Underground Reservoir Stability of Pumped Storage Power Station Based on Fluid-Structure Coupling

A Strategy of Suppressing the Underground Impact Scattered Current in Power Grid by Using Insulation Baffle

Analysis on UHV Substation Lightning Intruding Over-voltage Considering Power Frequency Voltage

Time-Domain Simulation of Tower with Grounding Device under Lightning Strikes

Simulation on Lightning Overvoltage of ± 800 Kv Converter Station's AC Yard