Abstract:Ammonia nitrogen removal from wastewaters has gained much attention in recent decades as a result of the environmental problems associated with discharge of excessive amounts of this critical nutrient including eutrophication of receiving waters, generation of offensive odours as a result of organism decay and complications associated with the disinfection of water supplies. While removal via biological processes represents the principal means by which a reduction in dissolved nitrogen concentrations is achieved, an electrochemical advanced oxidation process has been proposed as a potentially effective alternate means of removing ammonia from wastewaters with the removal associated with the in situ generation of oxidants (particularly active chlorine) at the anode. Here we describe the influence of key factors on the rate and extent of ammonia nitrogen removal in an electrochemical cell with a Ti/IrO2-RuO2 anode and Ti cathode. The rate of ammonia removal was found to be dependent on both current density and initial chloride concentration with ∼95% ammonia removed from a 20 mM Cl- solution within approximately 40 min at a current density of 3 mA cm-2, resulting in an energy consumption of 126 kWh kg-1 NH4+-N. Additionally, we show that by-products formation is effectively suppressed during the electrolysis process. A mechanistically-based kinetic model incorporating the key processes operating in the ammonia electro-oxidation process was developed with particular attention given to (i) anodic generation of active chlorine and other chloride-related by-products, (ii) active chlorine mediated ammonia oxidation. The results demonstrate that the electrochemical advanced oxidation process is a promising technology for treatment of ammonia-containing wastewaters with advantages including simplicity, safety and effectiveness.

Electrochemical Regeneration of Zeolites and the Removal of Ammonia

Application of an Electrochemical-Ion Exchange Reactor for Ammonia Removal

Efficient removal of nitrate using electrochemical-ion exchange method and pretreatment of straw with by-products for biological fermentation

Chemical Regeneration Performance of Natural Ca-form Zeolite Saturated with Ammonium

Removing Ammonia From Wastewater Using Natural and Synthetic Zeolites: A Batch Experiment

Electrocatalytic Upcycling of Nitrate Wastewater into an Ammonia Fertilizer via an Electrified Membrane.

Green Synthesis of Zeolite and Its Regeneration for Adsorption of Ammonia Nitrogen in Water

Inhibitory effects of Ca2+ on ammonium exchange by zeolite in the long-term exchange and NaClO–NaCl regeneration process

Comparison of Nature and Synthetic Zeolite for Waste Battery Electrolyte Treatment in Fixed-Bed Adsorption Column

Study on Ammonia-Nitrogen Removal in Wastewater Using Electrochemical Method

Zeolite-mediated Hybrid Cu+/Cu0 Interface for Electrochemical Nitrate Reduction to Ammonia

Enhancing Resource Recovery through Electro-Assisted Regeneration of an Ammonia-Selective Cation Exchange Resin

Experimental Study on Treatment of Low Concentration Ammonia Wastewater by Natural Zeolite

Construction and optimization of an iron particle–zeolite packing electrochemical–adsorption system for the simultaneous removal of nitrate and by-products

Simultaneous removal of ammonium ions and sulfamethoxazole by ozone regenerated high silica zeolites

Efficient Electrochemical Reduction of Nitrate to Nitrogen Using Ti/IrO2–Pt Anode and Different Cathodes

Electrochemical Reduction of Nitrate Using Various Anodes and a Cu/Zn Cathode

Non-thermal plasma combined with zeolites to remove ammonia nitrogen from wastewater

Treatment of nitrate contaminated water using an electrochemical method.

Enhancing performance of Fe-SSZ-13 and Cu-Fe-SSZ-13 zeolites for selective catalytic reduction reaction via post-treatment method

Active chlorine mediated ammonia oxidation revisited: Reaction mechanism, kinetic modelling and implications