Abstract:Track gauge is an important parameter of all track geometry parameters,thus it is of great significance to master the track gauge information in time for the train operation safety.A track gauge measurement system based on laser triangulation principle is proposed in this paper,which is mounted on the road-rail comprehensive inspection vehicle.Two sets of 2D laser scanning sensors,which are totally six,are used in the system to acquire the rail section profile and a synchronous signal triggering module base on CPLD is designed to make all the sensors to work synchronously.The adaptive filtering algorithm based on discontinuous degree is employed to adjust the weight factor in the processing of rail section outline data;and the track gauge points are extracted according to rail arc section characteristic algorithm;and the rail gauge of current rail section is calculated.The experimental results show that the track gauge measurement system can realize the dynamic and non-contact real time measurement of track gauge,the rail section sampling interval is 3.7 mm and the gauge measurement accuracy is ± 0.8 mm when the inspection vehicle operates at the speed of 40 km / h.

Study on track gauge measurement system based on laser triangulation principle