Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. Without the employment of new equipment, with units functioning at high levels of weights, sliding speeds and temperatures, the current growth of the sector is all but impossible. High levels of labour intensity have a detrimental impact on the dependability and durability of the product. Moving joints, which comprise friction units, frequently fail at the same time. It is vital to increase their dependability and durability. This can be accomplished by substituting more recent materials with higher-quality qualities for the friction pair materials. To create such materials, the researchers created an aromatic polyamide polymer that was filled with silicon- (silica gel, bentonite) and carbon-containing (technical carbon, graphite) components. It was determined that depending on their nature, structure and content in the polymer matrix, the addition of these fillers enables the reduction of the coefficient of friction and wear of the produced polymer composites by 1.5–2.5 and 20–40 times, respectively, during frictional interaction with steel. It was found that 10–15% by weight of the examined fillers in aromatic polyamide is the ideal concentration. It has been proven that polymer composites filled with layered materials (bentonite, graphite) perform better in terms of tribological qualities when in contact with steel than those filled with spherical elements (technical carbon, silica gel). The improvement of the tribological properties of the developed polymer composites in comparison to the original polymer was determined based on the microphotographs of steel surfaces and the study of their morphological (roughness) and physical (microhardness) properties. It was determined that the change in the friction nature was due to the creation of an antifriction coating on the metal friction surface from the products of tribochemical reactions occurring during friction.

Study on tribological properties of frictional material based aromatic polyamide

Effect of Lubricating Condition on Tribological Properties of Nano-SiO2 Filled Polyamide Composite

Tribological Properties of Ptfe-Filled Pmia

Comparative Evaluation of Tribological Effectiveness of Carbon- and Glass-Filled Polyamide Composites Using Submicromechanical Diagnostics of Surface Layers before and after Wear Tests during Dry Sliding Friction

Tribological Characteristics of Fibrous Polyphthalamide-Based Composites

Tribological properties of kaolin filled UHMWPE composites in unlubricated sliding

Improved Tribological Properties of Poly(methyl methacrylate) Based Composites by the Synergistic Effect of Incorporating Ultra-High Molecular Weight Polyethylene and Heat Treatment

Polymer composites based on aromatic polyamide and fillers of spherical and layered structure for friction units of high-performance equipment

Tribological and Mechanochemical Properties of Nanoparticle-Filled Polytetrafluoroethylene Composites under Different Loads

Triboanalysis of Antifrictional Materials Based on Polyamides for Metal-Polymer Sliding Bearings

Effect of different fillers on thermal conductivity, tribological properties of Polyamide 6

Tribological Behaviors of Several Polymer–polymer Sliding Combinations under Dry Friction and Oil-Lubricated Conditions

Friction and Wear Characteristics of Polymer-Matrix Friction Materials Reinforced by Brass Fibers

Research on polyamide based self-lubricating composites: A review

Comparative study on the tribological properties of poly(arylene ether nitrile)/polytetrafluoroethylene composites: The influence of filler size and testing conditions

Tribological Behavior of Polyamide 66‐based Binary and Ternary Composites

Mechanical and Tribological Properties of Polytetrafluoroethylene Modified with Combined Fillers: Carbon Fibers, Zirconium Dioxide, Silicon Dioxide and Boron Nitride

Frictional and wear behaviors of short carbon fiber reinforced polyetherimide composites in an oil lubricant environment

Comparative study on tribological mechanisms of polyimide composites when sliding against medium carbon steel and NiCrBSi

The effects of filler type on the friction and wear performance of PEEK and PTFE composites under hybrid wear conditions

Improving Thermal Conductivity and Tribological Performance of Polyimide by Filling Cu, CNT, and Graphene