Abstract:There is extensive data to show that heating and cooling produces irrecoverable deformations in clays under fully drained conditions. The effects are most pronounced for normally and lightly overconsolidated clays that undergo significant compression. Most constitutive models have key limitations for predicting the thermo-mechanical response of clays through long-term (seasonal) cycles of heating and cooling. The Tsinghua ThermoSoil model (TTS; Zhang and Cheng in Int J Numer Anal Methods Geomech 41(4):527–554, 2017 ) presents a novel theoretical framework for simulating the coupled thermo-mechanical response of clays. The model uses a double-entropy approach to capture effects of energy dissipation at the microscopic particulate contact level on continuum behavior. This paper proposes a simple procedure for calibrating input parameters and illustrates this process using recent laboratory data for Geneva Clay (Di Donna and Laloui in Eng Geol 190:65–76, 2015 ). We then investigate capabilities of the TTS model in simulating familiar aspects of thermal consolidation of clays as well as the long-term, progressive accumulation of strains associated with seasonal heating and cooling processes for shallow geothermal systems installed in clays. The model predicts the existence of a long-term steady-state condition where there is no further accumulation of strain. This state depends on the consolidation stress and stress history but is independent of the imposed range of temperature, T cyc . However, the value of T cyc does affect the rate of accumulation of strain with thermal cycles. Simulations for normally consolidated Geneva Clay find steady-state strain conditions ranged from 2.0 to 3.7% accumulating within N = 10–50 thermal cycles.

A Double Hardening Thermo-Mechanical Constitutive Model for Overconsolidated Clays

Modeling of Thermo-Mechanical Behavior of Saturated Clays

A Bounding Surface Model for Anisotropically Overconsolidated Clay Incorporating Thermodynamics Admissible Rotational Hardening Rule

Thermodynamics-based bounding surface model for overconsolidated clay

Modeling the Combined Effect of Time and Temperature on Normally Consolidated and Overconsolidated Clays

Unified Modeling of the Influence of Consolidation Conditions on Monotonic Soil Response Considering Fabric Evolution

A Unified Thermal-Hardening and Thermal-Softening Constitutive Model of Soils

Modeling Temperature-Dependent Behavior of Soft Clay

One Dimensional Formulae for Time-Dependent Compression Characteristics of Over-Consolidated Clays

Non-isothermal Unified Hardening Model: a Thermo-Elasto-plastic Model for Clays

A Thermo-Elasto-Plastic Constitutive Model For Saturated Clay Based On Disturbed State Concept

Constitutive Model for Unsaturated Clays Considering Temperature Effects

Hydro-mechanical Constitutive Model for Overconsolidated Unsaturated Soils

An Elastic-Viscoplastic Model for Time-Dependent Behavior of Soft Clay and Its Application on Rheological Consolidation

A Unified Hardening Model for K0 Overconsolidated Clays

Modeling Strain-Rate Dependent Behavior of KR0-Consolidated Soft Clays

Comparison Study of Constitutive Models for Overconsolidated Clays

Thermodynamic Constitutive Model for Non-Isothermal Consolidation and Undrained Shear Behaviors of Saturated Soils

Elastoplastic Model for Overconsolidated Clays with Focus on Volume Change under General Loading Conditions

A Thermoplastic Clay Constitutive Model with Temperature Dependent Evolution of Stress Anisotropy

Simulation of Long-Term Thermo-Mechanical Response of Clay Using an Advanced Constitutive Model