Abstract:Self-assembled monolayers (SAMs) are widely used as surface modification structures for thin films synthesis and designed nanostructures fabrication1. Alkyltrichlorosilanes is a group of SAMs widely applied in the field of area-selective atomic layer deposition (AS-ALD). The closely packed octadecyltrichlorosilane (ODTS) SAMs could act as monolayer resist to prohibit ALD2, while the pinholes on unsaturated ODTS SAMs could act as nucleation sites to initiate ALD growth. Thus the distribution and structure of pinholes, including its size and density, are important factors for utilizing SAMs template to fabricate nanoparticles via ALD. Many studies characterize SAMs and pinholes by atomic force microscopy (AFM), scanning electron microscopy (SEM), scanning tunneling microscope (STM), etc3. Most of these methods could provide the microscopic information on the pinhole structures, yet the information from these methods is quite localized and hard to obtain statistical average and full-scale information about the pinhole size and distribution density. Here we report utilizing electrochemical impedance spectroscopy (EIS) to study the size distribution and loading of initial nanoparticles grown in those pinhole sites. EIS is a powerful and surface sensitive characterization technique to obtain the average and global characters of the detected surfaces4,5. In this study, the properties of unsaturated ODTS SAMs are characterized with EIS methods. The relationship between SAMs growth time and the pinholes properties has been established. With the SAMs immersing time increasing, the sizes and density distribution are both reduced. For SAMs sample immersed over long time, at least 24 hours, negligible pinholes are observed. Furthermore, Pd ALD process has been carried on those SAMs modified substrates. The distribution of Pd nanoparticles corresponds well with the pinholes. The results show that the nanoparticles grown on SAMs modified substrates depend on the pinholes properties. With SAMs modified substrate, ALD grown noble metal nanoparticles with uniform size and controlled loading density can be achieved. References: J. Christopher Love, Lara A. Estroff, Jennah K. Kriebel, Ralph G. Nuzzo, George M. Whitesides, Chem. Rev. 2005, 105, 1103−1169 Rong Chen, Hyoungsub Kim, Paul C. McIntyre, Stacey F. Bent, Chem. Mater. 2005, 17, 536-544 Han-Bo-Ram Lee, Marja N. Mullings, Xirong Jiang, Bruce M. Clemens, Stacey F. Bent Chem. Mater. 2012, 24, 4051–4059 Byung-Wook Park, Do-Young Yoon, Dong-Shik Kim, Journal of Electroanalytical Chemistry 2011, 661, 329–335 Xiaoquan Lu, Huiqing Yuan, Guofang Zuo, Jiandong Yang, Thin Solid Films 2008, 516, 6476–6482

A General Approach to Electrochemical Deposition of High Quality Free-Standing Noble Metal (pd, Pt, Au, Ag) Sub-Micron Tubes Composed of Nanoparticles in Polar Aprotic Solvent.

Synthesis and deposition of ultrafine noble metallic nanoparticles on amino-functionalized halloysite nanotubes and their catalytic application

Ph-Dependent Growth of Atomic Pd Layers on Trisoctahedral Gold Nanoparticles to Realize Enhanced Performance in Electrocatalysis and Chemical Catalysis

Engineering Porosity into Trimetallic PtPdNi Nanospheres for Enhanced Electrocatalytic Oxygen Reduction Activity

A universal strategy for green and surfactant-free synthesis of noble metal nanoparticles

Single-Atom Electroplating on Two Dimensional Materials

Synthesis of Ag/Pd Nanoparticles Via Reactive Micelles As Templates and Its Application to Electroless Copper Deposition.

Selective Heterogeneous Nucleation and Growth ofSize-Controlled Metal Nanoparticles on Carbon Nanotubes in Solution

Synthesis of Metal Nanoparticles Via Self-Regulated Reduction by an Alcohol Surfactant

The fabrication of short metallic nanotubes by templated electrodeposition

Controlled Assembly of Au, Ag, and Pt Nanoparticles with Chitosan.

Stainless steel-like FeCrNi nanostructures via electrodeposition into AAO templates using a mixed-solvent Cr(III)-based electrolyte

Synthesis of Hydrophilic and Hydrophobic Pd Nanoparticles with in Situ Generated Reducing Agent and Their Application As Activator for Electroless Copper and Nickel Depositions

Anhydrous metal nanoparticle suspensions using deep eutectic solvents (DES) – Green approach to metal nanoparticles production

Synthesis of Noble Metal Nanoparticles by Atomic Layer Deposition Utilizing Self-Assembled Monolayers Templates

A simple electrochemical method for conversion of Pt wires to Pt concave icosahedra and nanocubes on carbon paper for electrocatalytic hydrogen evolution

A General Strategy Assisted with Dual Reductants and Dual Protecting Agents for Preparing Pt-Based Alloys with High-Index Facets and Excellent Electrocatalytic Performance.

Dealloying to Nanoporous Silver and Its Implementation As a Template Material for Construction of Nanotubular Mesoporous Bimetallic Nanostructures

A simple mixed surfactant route for the preparation of noble metal dendrites

Preparation of cyanide-free gold-tin alloys by ultrasonic-assisted pulse electrodeposition

Controllably Constructing Gold Nanostructures on Electrodes Through Growth of Zinc Oxide Nanorods and Two-Step Electroplating