Abstract:This article proposes a new finite control set model predictive control (FCS-MPC) strategy that simultaneously evaluates two targeting control objectives including speed and currents in a single cost function, achieving high-performance single-closed-loop control structure. Besides, aiming at the calculation delay problem of the model predictive control controllers, a novel calculation delay compensation method by predicting the current variation within the delay time is proposed. In this article, an improved machine model that is especially designed for the multiobjective FCS-MPC operation is illustrated at first. Then, a new cost function that can evaluate the tracking performance of speed and d-axis current and the steady-state performance of the q-axis current is developed. Compared with the conventional FCS-MPC approaches, extra speed controllers are not needed so that the proposed control topology becomes simpler. Then, in order to tune the weighting factors for the speed and currents in the cost function, an efficient handling strategy containing two implementation procedures, state variable normalization and balance of state sensitivity to voltage alteration, is developed. Finally, a brand-new computation delay estimation and compensation technique based on the dual sampling within a control period is proposed to reduce the current and torque ripples during the control process. Comparative simulation and experiments conducted on a three-phase 1.5-kW permanent magnet synchronous machine drive system are employed to verify the effectiveness of the proposed techniques.

Nonlinear Model Predictive Control of Sofc Based on A Hammerstein Model

A Thermal Management Strategy for Proton Exchange Membrane Fuel Cell via Nonlinear Model Predictive Control

Nonlinear dynamic modeling for a SOFC stack by using a Hammerstein model

Nonlinear Model Predictive Control Based on the Moving Horizon State Estimation for the Solid Oxide Fuel Cell

IPMSM Model Predictive Control in Flux-Weakening Operation Using an Improved Algorithm

Predictive Control of SOFC Based on a GA-RBF Neural Network Model

Voltage and Fuel Utilization Control for Solid Oxide Fuel Cells with Combined L1 Adaptive – Predictive Control Strategy

Multiple model predictive control for solid oxide fuel cells

Multiple Model Predictive Hybrid Feedforward Control Of Fuel Cell Power Generation System

Lyapunov-Based Fast Finite-State Model Predictive Control for Sensorless Three-Phase Four-Arm MMC

Multi-model Predictive Control of Solid Oxide Fuel Cells

Constrained computationally efficient nonlinear predictive control of Solid Oxide Fuel Cell: Tuning, feasibility and performance

A Predictive Model Of Solid Oxide Fuel Cell Stacks For Thermal Mangement

A Novel Adaptive Model Predictive Control Strategy of Solid Oxide Fuel Cell in DC Microgrids

Constrained model predictive control of a solid oxide fuel cell based on genetic optimization

Study on an Adaptive Multi-Model Predictive Controller for the Thermal Management of a SOFC-GT Hybrid System

Multiobjective Finite Control Set Model Predictive Control Using Novel Delay Compensation Technique for PMSM

Data-driven Nonlinear Control of a Solid Oxide Fuel Cell System

Current-based MPC for Operating-Safety Analysis of a Reduced-Order Solid Oxide Fuel Cell System

A Combined Voltage Control Strategy for Fuel Cell

Nonlinear modeling of a SOFC stack based on a least squares support vector machine