Abstract:Feedrate scheduling is one of the most important factors of computer numerical control (CNC) machining and has become a crucial research problem. In order to improve the machining accuracy and motion smoothness, an optimized feedrate scheduling method considering round-off error compensation based on S-shaped acceleration/deceleration (ACC/DEC) algorithm is proposed in this paper. There are two main stages, namely initial feedrate scheduling and parameters calculation of round-off error compensation. In the stage of initial feedrate scheduling, a novel time rounding principle is introduced to reduce the round-off error. Meanwhile, the motion parameters of each section can be calculated based on the proposed feedrate scheduling method. The constant feedrate section used for round-off error compensation is always guaranteed to exist although the actual maximum feedrate might be smaller than the command feedrate. Then, in the stage of compensation parameters calculation, the round-off error can be obtained based on the proposed time rounding principle and the scheduled parameters should be updated. In order to maintain the continuity of the acceleration profile, the improved trapezoidal ACC/DEC algorithm is introduced to conduct the error compensation and the crucial parameters can be calculated based on its special properties. In addition, the feedrate look-ahead strategy is also tweaked to enhance the reliability of feedrate scheduling. Finally, a series of simulations and practical experiments with two non-uniform rational B-spline (NURBS) curves are conducted to verify the good performance and applicability of the proposed method.

A Feedrate Scheduling Strategy Based on A General Force Model

A Feedrate Scheduling in Die-Cavity Roughing Based on Cutting Force Surface Model

Feedrate scheduling strategy for free-form surface machining through an integrated geometric and mechanistic model

A Novel Automatic Feedrate Adjustment Method for Die-Cavity Roughing

Research On Feedrate Control Strategy For Sculptured Surfaces Machining With Five-Axis Cnc

An Intelligent Optimization Approach of Feedrate Scheduling Based on Hybrid Simulation Models

A Feedrate Planning Method for the NURBS Curve in CNC Machining Based on the Critical Constraint Curve

Predictive Force Model Based Variable Feedrate Scheduling for High-Efficiency NC Machining

A Novel Minimum-Time Feedrate Schedule Method for Five-Axis Sculpture Surface Machining with Kinematic and Geometric Constraints

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

Multi-constrained adaptive feedrate schedule strategy for complex curved surface machining

A Force-Measuring-based Approach for Feed Rate Optimization Considering the Stochasticity of Machining Allowance

Mechanics-based Feedrate Scheduling for Multi-Axis Plunge Milling

Adaptive Feedrate Planning on Parametric Tool Path with Geometric and Kinematic Constraints for CNC Machining

An open-minded automatic feedrate adjustment method for die-cavity machining

Feedrate Scheduling Method for Constant Peak Cutting Force in Five-Axis Flank Milling Process

An Adaptive Feedrate Scheduling Method With Multi-Constraints For Five-Axis Machine Tools

Adaptive feedrate scheduling for NC machining along curvilinear paths with improved kinematic and geometric properties

Feedrate optimization for variant milling process based on cutting force prediction

An Optimized Feedrate Scheduling Method for CNC Machining with Round-off Error Compensation

Modeling and Optimization of High-Grade Compacted Graphite Iron Milling Force and Surface Roughness Via Response Surface Methodology