Abstract:The results of mathematical modeling process of melting scrap metal in the bath of an oxygen converter are presented. The influence relative amount of scrap metal in the charge of oxygen-converter smelting and its density on dynamics bath temperature during melting, slag oxidation and liquid metal yield was studied. It is shown that due to change in the shape of scrap metal during its melting, the classical approach to determining the reactive surface area of the latter needs to be clarified.Mathematical descriptions of scrap metal melting in converter smelting by linear dependence and using fourth degree polynomials, which take into account the influence of initial and current carbon concentration in the bath, are offered. The influence of density and fraction of scrap metal, which is a part of metal charge, on duration of its melting in bath of oxygen converter, content iron oxides in slag, temperature mode process and yield liquid metal is investigated. It is shown that increasing mass of scrap metal in the metal charge to 40%, in the absence of its preheating, significantly changes the appearance both the oxidation curves of carbon and the dynamics of the bath temperature in the initial period melting.The latter may be due to the preservation active surface area of scrap metal as its mass changes. Additional heat consumption for melting an increased amount preheated («cold») scrap metal leads to a decrease in the temperature of the liquid bath, which confirms the feasibility using the technology melting with preheating an increased amount of scrap.It is shown that from the point of view ensuring the rational course of converter smelting it is expedient to use equal shares heavy and lightweight scrap metal, regardless of the share latter in the metal charge. In the case using, under the considered conditions, «cold» scrap metal, the maximization yield of liquid metal is provided at the amount scrap up to 22% of the total mass metal charge.

Research on Physical Modeling of Nonferrous Metals Bath Smelting

Multiphase Modelling of the Continuous Metallurgical Purification Process for Impurity Removing of Recycled Aluminum

Study on the Bath Smelting Reduction Reaction and Mechanism of Iron Ore: A Review

Physical Metallurgy and Modeling/Simulation of Next Generation Net Shape Casting Technology

Phase Equilibrium Studies of Nonferrous Smelting Slags: A Review

Review on Modeling and Simulation of Blast Furnace

Research Status of Numerical Simulation of Selective Laser Melting Process at Home and Abroad

Research on Remelting Phenomena and Metal Joining of Fused-Coating Additive Manufacturing

Modeling of Thermochemical Behavior in an Industrial-Scale Rotary Hearth Furnace for Metallurgical Dust Recycling

Numerical Investigation About the Effect of Axial Static Magnetic Field on Improvement of Metal Pool Profile During Electroslag Remelting Process

Review of Research on Metal Solidification Structure Refinement

Numerical Simulation of Multiphase Flow in Ironmaking Process for Oxygen-Rich Side-Blown Bath Smelting Furnace

Development on Nonferrous Cast Alloys and the Corresponding Special Casting Technologies in China

Research on Metal Flow Behavior and Forming Force in Sheet Metal Extrusion Process

Research Progress of Solid-state Recycling for Non-ferrous Metal Alloys

Study on numerical simulation of mold-filling and solidification processes of shaped casting

New Progress in the Development and Utilization of Ferromanganese Ore

MODELING THE MELTING OF SCRAP METAL OF DIFFERENT DENSITY IN A BOF SMELTING

Progress in numerical simulation of solidification process of shaped casting

Effect of bottom stirring on bath mixing and transfer behavior during scrap melting in BOF steelmaking: A review

Application of Pressurized Hydrometallurgical Technology in Zinc Smelting