Abstract:Columns of overpasses are highly exposed to the potential hazard of vehicular collisions. This type of collisions occurred in the past, sometimes with catastrophic consequences. Previous research reported in the literature has explored the dynamic response of RC column under impact loading using both numerical and experimental methods. The majority of the available tests were performed on horizontal elements featuring beam characteristics. In this context, a new facility for the testing of vertical elements featuring the real characteristics of RC columns was realized in the Collision Laboratory of Nanjing Tech University. Four impact tests on cantilever circular RC column were conducted using this facility. The diameter of the column is 330 mm and the height is 1700 mm The column is a one-third scaled model of a 5.2 m tall RC bridge pier. All the columns have the same configuration of the longitudinal reinforcement bars and two different hoop spacings both representing the case of a low shear reinforced structural element. Impact force, lateral displacements and accelerations were measured. A high-speed camera was adopted to record the evolution of the damage of the RC column during the impact. A brittle shear-type damage was observed characterized by one main diagonal crack located from the rear base of the column to the base of the impact point. Finally, a numerical study was also conducted using LS-DYNA showing a good agreement with the experimental results, especially in the low-velocity impacts. Results highlighted the vulnerability of these structural elements under impact loading. (C) 2017 The Authors. Published by Elsevier Ltd.

EXPERIMENTAL STUDY ON MULTI-BODY IMPACT AMONG CONCRETE BLOCKS

Impact Action Between Concrete Blocks in Collapse Analysis of Reinforced Concrete Structures

Simulation of a 3-D Concrete Frame Structure Collapse in Considering Impact Action among Blocks

Large-Scale Experimental Evaluation of Building System Response to Sudden Column Removal

Experimental and Numerical Study on the Behavior of Circular RC Columns under Impact Loading

Impact Analysis and Absorber Design for Collision Protection of Part-Buried Structures

Experimental research on a large scale RC frame model subjected to sudden corner column removal

Impact Tests of Model RC Columns by an Equivalent Truck Frame

SIMULATION ON THE COLLAPSE PROCESS OF 3-D CONCRETE FRAME STRUCTURES CONSIDERING IMPACT ACTION BETWEEN CONCRETE BLOCKS

Multi-Scale Analysis Of Damage Process For Concrete Structures

Recent Advances of Dynamic Mechanical Behavior of Concrete under Impact Loading

Collapse Simulation of Reinforced Concrete Moment Frames Considering Impact Actions among Blocks

NUMERICAL SIMULATION OF FAILURE BEHAVIOR OF REINFORCED CONCRETE FRAME STRUCTURES BY DISCRETE ELEMENT METHOD

COLLAPSE ANALYSIS OF REINFORCED CONCRETE FRAME STRUCTURES CONSIDERING COLLISION EFFECTS

Numerical analysis for collapse reponse of a RC frame subjected to impact loading based on multi-scale model

Experimental and Numerical Investigation on the Dynamic Responses of the Remaining Structure under Impact Loading with Column Being Removed

Experimental Study on Dynamic Collision Characteristics of Concrete

Numerical Simulation on Failure Process of Prestressed Concrete Structures under Impact Load

Numerical Simulation of the Longitudinal Impact of Hammer Percussive Drilling System

Experimental and Numerical Analysis of Reinforced Concrete Columns under Lateral Impact Loading

Numerical and experimental studies on impact dynamics of a planar flexible multibody system