Abstract:The cathode catalyst plays an important role in the electricity generation of microbial fuel cells (MFCs). In order to achieve the large-scale application of MFCs, cathode catalyst with low cost and high oxygen reduction reaction (ORR) has great sense to substitute the precious catalyst of Pt/C. Here chemical vapor deposition (CVD) method was utilized accompanied with melamine as a nitrogen and carbon precursor, oxidized carbon powder (Black Pearls 2000 or Acetylene Black) as carbon precursor and iron acetate as an iron precursor so as to synthesize two kinds of Fe and nitrogen doped carbon nanotube/nanoparticle composites (FeNCB and FeNCC) as MFCs cathode catalysts. The cyclic voltammetry and rotating ring-disk electrode were applied to analyze the ORR activity discrepancies of FeNCB, FeNCC, and Pt/C (20%), which was confirmed by MFC operation. The results showed that the ORR performance of FeNCB was slightly better than Pt/C and dramatically better than FeNCC. Moreover, the catalysis of ORR by FeNCB was through a four-electron transfer pathway. Besides, the performance of MFC-FeNCB was higher than MFC-Pt/C and observably higher than MFC-FeNCC which was a contribute to promote the scale of MFC. MFC-FeNCB achieved the maximum power output density of 1212.8 mW x m(-2), an open circuit potential of 0.875 V, and a stabilized voltage of (0.500 +/- 0.025) V. Further analysis via X-ray diffraction, X ray photoelectron spectroscopy, and Raman exhibited that the diameter of carbon nanotube, the types of N and Fe as well as the concentration of nitrogen, iron and oxygen was the reason for the discrepancies of ORR characteristics for the prepared catalysts.

Development of high performance of Co/Fe/N/CNT nanocatalyst for oxygen reduction in microbial fuel cells.

Manganese Dioxide-Coated Carbon Nanotubes As an Improved Cathodic Catalyst for Oxygen Reduction in a Microbial Fuel Cell

Ordered porous nitrogen-doped carbon with atomically dispersed FeN 4 for efficient oxygen reduction reaction in microbial fuel cell

Cobalt‑nitrogen‑carbon Nanotube Co-Implanted Activated Carbon As Efficient Cathodic Oxygen Reduction Catalyst in Microbial Fuel Cells

CoMn2O4-supported Functionalized Carbon Nanotube: Efficient Catalyst for Oxygen Reduction in Microbial Fuel Cells

Nanopolyhedral Zn/Fe-NC derived from bimetallic zeolitic imidazole frameworks as an efficient catalyst for the oxygen reduction reaction in an air-cathode microbial fuel cell

[Synthesis of Fe/nitrogen-doped Carbon Nanotube/Nanoparticle Composite and Its Catalytic Performance in Oxygen Reduction].

Cobalt oxides nanoparticles supported on nitrogen-doped carbon nanotubes as high-efficiency cathode catalysts for microbial fuel cells

Iron-embedded Nitrogen Doped Carbon Frameworks As Robust Catalyst for Oxygen Reduction Reaction in Microbial Fuel Cells

Synthesis of Fe/nitrogen-doped Carbon Nanotube/Nanoparticle Composite and Its Catalytic Performance in Oxygen Reduction]

Leaf-like Carbon Frameworks Dotted with Carbon Nanotubes and Cobalt Nanoparticles As Robust Catalyst for Oxygen Reduction in Microbial Fuel Cell

Iron-rich Nanoparticle Encapsulated, Nitrogen Doped Porous Carbon Materials As Efficient Cathode Electrocatalyst for Microbial Fuel Cells

Bimetallic zeolitic imidazole framework derived Co@NC materials as oxygen reduction reaction catalysts application for microbial fuel cells

Bimetallic Metal-Organic Frameworks Derived Cobalt Nanoparticles Embedded in Nitrogen-Doped Carbon Nanotube Nanopolyhedra As Advanced Electrocatalyst for High-Performance of Activated Carbon Air-Cathode Microbial Fuel Cell.

Nanorod CoFe2O4 Modified Activated Carbon As an Efficient Electrocatalyst to Improve the Performance of Air Cathode Microbial Fuel Cell

Ordered mesoporous carbon with atomically dispersed Fe-Nx as oxygen reduction reaction electrocatalyst in air-cathode microbial fuel cells

Nickel Oxide and Carbon Nanotube Composite (nio/cnt) As A Novel Cathode Non-Precious Metal Catalyst in Microbial Fuel Cells

Co2P Embedded in Nitrogen-Doped Carbon Nanoframework Derived from Co-based Metal-Organic Framework As Efficient Oxygen Reduction Reaction Electrocatalyst for Enhanced Performance of Activated Carbon Air-Cathode Microbial Fuel Cell

Transition Metal (fe, Co, Ni) and Sulfur Codoped Nitrogen-Enriched Hydrothermal Carbon As High-Performance Cathode Catalyst for Microbial Fuel Cell

Atomically Dispersed Fe–N4 Moieties in Porous Carbon As Efficient Cathode Catalyst for Enhancing the Performance in Microbial Fuel Cells

Carbon Supported Cobalt Oxide Nanoparticles–iron Phthalocyanine As Alternative Cathode Catalyst for Oxygen Reduction in Microbial Fuel Cells