Abstract:Ultrafine-grained pure metals and their alloys have high strength and low ductility. In this study, cryorolling under different strains followed by low-temperature short-time annealing was used to fabricate pure nickel sheets combining high strength with good ductility. The results show that, for different cryorolling strains, the uniform elongation was greatly increased without sacrificing the strength after annealing. A yield strength of 607 MPa and a uniform elongation of 11.7% were obtained after annealing at a small cryorolling strain (ε = 0.22), while annealing at a large cryorolling strain (ε = 1.6) resulted in a yield strength of 990 MPa and a uniform elongation of 6.4%. X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and electron backscattered diffraction (EBSD) were used to characterize the microstructure of the specimens and showed that the high strength could be attributed to strain hardening during cryorolling, with an additional contribution from grain refinement and the formation of dislocation walls. The high ductility could be attributed to annealing twins and micro-shear bands during stretching, which improved the strain hardening capacity. The results show that the synergistic effect of strength and ductility can be regulated through low-temperature short-time annealing with different cryorolling strains, which provides a new reference for the design of future thermo-mechanical processes.

High Tensile Ductility and Strength in Bulk Nanostructured Nickel

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Microstructure‐Property Relations in the Tensile Behavior of Bimodal Nanostructured Metals

Nanodomained Nickel Unite Nanocrystal Strength with Coarse-Grain Ductility

Recent progress in improving ductility of ultra-high strength nanostructured metals

Achieving High Strength and Tensile Ductility in Pure Nickel by Cryorolling with Subsequent Low-Temperature Short-Time Annealing

Make Nanostructured Metal Exceptionally Tough by Introducing Non-Localized Fracture Behaviors

High tensile ductility in a nanostructured metal

Eight routes to improve the tensile ductility of bulk nanostructured metals and alloys

Making a Coherent L12-nano-precipitates-reinforced Ni-based Alloy Ultrastrong and Ductile by Constructing Dual Heterogeneous Structures

Simultaneously Increasing the Ductility and Strength of Nanostructured Alloys

A novel nanostructure to achieve ultrahigh strength and good tensile ductility of a CoCrFeNiMn high entropy alloy

High-order Hierarchical Nanotwins with Superior Strength and Ductility

Four Approaches to Improve the Tensile Ductility of High-Strength Nanocrystalline Metals

Enhanced Tensile Ductility in an Electrodeposited Nanocrystalline Ni

High-performance Bulk Ti-Cu-Ni-Sn-Ta Nanocomposites Based on a Dendrite-Eutectic Microstructure

Ultrastrong nanotwinned pure nickel with extremely fine twin thickness

Lamellar Aspect-Ratio and Thickness-Dependent Strength-Ductility Synergy in Pure Nickel During In-Situ Micro-Tensile Loading

Multifunctional metallic nanocomposite for overcoming the strength–ductility trade-off

Enhanced Tensile Ductility and Toughness in Nanostructured Cu

A nanodispersion-in-nanograins strategy for ultra-strong, ductile and stable metal nanocomposites