Abstract:Blending isotactic polybutene-1 (PB) with isotactic polypropylene (PP) is a facial strategy to improve the mechanical properties and promote polymorphous transformation of PB. As the immiscible polymer pairs with strong crystallizability, the interactions between PP and PB in the melt state influence the subsequent processes like phase separation and crystallization, and then determine the crystalline structures and properties of the blends. Herein, two kinds of poly(butene-block-propylene) (PB-b-PP) copolymers with different sequence structures fractionated from PB/PP in-reactor alloy using temperature rising elution fractionation were utilized to compatibilize the PB/PP (80/20) blend. The phase morphologies, crystallization kinetics of PP and PB phases, and crystalline structures in PB/PP/PB-b-PP blends were characterized by phase contrast optical microscopy (PCOM), differential scanning calorimeter (DSC), and small-angle X-ray scattering (SAXS). The PB-b-PP copolymer with longer PP blocks (A) showed more satisfied compatibilization for PB/PP blends and PB/PP/PB-b-PP2.5 blend with 2.5 wt% copolymer as compatibilizer exhibited the most stable phase morphology with the smallest PP domains in melt state at 200 degrees C. During isothermal crystallization processes of the PB/PP/PB-b-PP blends at 135 degrees C for PP crystallization and then 90 degrees C for PB crystallization, the crystallization rate including nucleation rate and nucleation density, and crystallinity of PP and PB (form II) increased, and achieved the largest when the copolymer concentration was 2.5 wt% in PB/PP/PB-b-PP blend. The copolymer A significantly accelerated crystallization rate of PP compared with that of copolymer B. The PB/PP/A-2.5 blend with the largest lamellae thickness and highest crystallinity of PB form I, combined with the smallest spherulites, exhibited the highest modulus, tensile strength and toughness. The compatibilizing mechanism and roles of PB-b-PP copolymers for PB/PP blends were discussed to understand the physical and mechanical behaviors of the blends.

Thermal, Morphological, and Mechanical Characteristics of Polypropylene/polybutylene Terephthalate Blends with a Liquid Crystalline Polymer or Ionomer

Miscibility enhancement of PP/PBT blends with a side-chain liquid crystalline ionomer

Compatibilization by Main‐chain Thermotropic Liquid Crystalline Ionomer of Blends of PBT/PP

Morphology and Mechanical Properties of PBT/PP Blends Containing Liquid Crystalline Ionomers with Different Ion

Compatibilization of PBT/PP Blends by Adding Liquid Crystalline Ionomer with Sulfonic Group

Compatibilization of side-chain, thermotropic, liquid-crystalline ionomers to blends of polyamide-1010 and polypropylene

Rheology of Poly(lactic Acid)/poly(trimethylene Terephthalate) Blends Compatibilized by Clay or Maleic Anhydride-Grafted Poly(ethylene-Octene) Elastomer

Introduction of Stereocomplex Crystallites of PLA for the Solid and Microcellular Poly(lactide)/poly(butylene Adipate-Co-terephthalate) Blends

Compatibilization of PBT/PE Blends by Adding Liquid Crystalline Ionomer with Sulfonic Group

Morphology and Crystallization Behavior of Compatibilized Isotactic Polypropylene/Poly(butylene Terephthalate) Blends under Shear Flow

Crystallization Kinetics, Crystalline Structures and Properties of PB/PP Blends Regulated by Poly(butene-Block-propylene) Copolymers

Morphology, Tensile Strength and Thermal Behavior of Isotactic Polypropylene/Syndiotactic Polystyrene Blends Compatibilized by SEBS Copolymers

Blends of Polypropylene and Syndiotactic 1,2-Polybutadiene: Morphology, Crystallization Behaviors and Mechanical Properties

Influences of Dicumyl Peroxide on Morphology and Mechanical Properties of Polypropylene/poly(styrene‐b‐butadiene‐b‐styrene) Blends Via Vane‐extruder

Effect of cross-linked LLDPE/PP blend (LLDPE-PP) as compatibilizer on morphology, crystallization behavior and mechanical property of LLDPE/PP blends

Preparation and Characterization of Biodegradable Poly(propylene carbonate-<i>co</i>-phthalate)/Poly(butylene adipate-<i>co</i>-terephthalate) Blends

Structure and Improved Properties of PPC/PBAT Blends Via Controlling Phase Morphology Based on Melt Viscosity

Effect of triphenyl phosphite as a reactive compatibilizer on the properties of poly(<sub><i>L</i></sub>-lactic acid)/poly(butylene succinate) blends

Miscibility, thermal characterization and crystallization of poly(l-lactide) and poly(tetramethylene adipate-co-terephthalate) blend membranes

Morphology And Compatibility In Blends Of Poly(Vinyl Methyl Ether) And Poly(Epsilon-Caprolactone-Block-Butadiene) Copolymer

Compatibilization of Styrene–butadiene–styrene Block Copolymer in Polypropylene/polystyrene Blends by Analysis of Phase Morphology