Abstract:Biodegradable polybutylene adipate terephthalate/polylactic acid (PBAT/PLA) composites with good interfacial adhesion, mechanical properties, flame retardancy and melt processability are demanded by the plastics sector. To simultaneously achieve these attributes, researchers are actively seeking novel compatibilizers for these polymers. Herein, two ionic liquids (denoted as IL1 and IL2), comprising phosphonium cations (PR4+) with different length alkyl substituents (R) and phosphorus containing asymmetric anions (RPO32−), were successfully synthesized and applied as compatibilizers to prepare PBAT/ILs/PLA composites by melt blending and injection molding. Owing to chain entanglement between the long alkyl chains of PR4+ and RPO32− with the PLA and PBAT polymer chains, as well as interactions between the anion -PO32− groups and ester groups on PLA and PBAT, the toughness, flame retardancy and processability of the composites were all enhanced. Adding the ILs resulted in the more uniform dispersion of PLA in the PBAT matrix. The elongation at break of composites containing 0.4 wt.% IL1 or IL2 increased by 329.9 % and 168.5 %, respectively, relative to pristine PBAT/PLA composites. At an IL content of 0.7 wt.%, both of PBAT/IL1/PLA composites and PBAT/IL2/PLA composites possessed excellent flame retardancy (a limiting oxygen index of 28.1 and 27.3, respectively). Furthermore, the melt fluidity of the PBAT/ILs/PLA composites increased with increasing IL content. This work conclusively demonstrates that ionic liquids can serve as excellent compatibilizers for high performance biodegradable PBAT/PLA composites.

Compatibilization of PBT/PP Blends by Adding Liquid Crystalline Ionomer with Sulfonic Group

Blending Effects on Polymorphic Crystallization of Poly(l-lactide)

Compatibilizing Efficiency of Copolymer Precursors for Immiscible Polymer Blends

Effects of reactive compatibilization on the morphological, thermal, mechanical, and rheological properties of intumescent flame-retardant polypropylene.

Compatibilization of Ppo/Lcp Blends by Semi-Interpenetrating Liquid Crystalline Polymer Networks Lcp/Ps

Rheology of Poly(lactic Acid)/poly(trimethylene Terephthalate) Blends Compatibilized by Clay or Maleic Anhydride-Grafted Poly(ethylene-Octene) Elastomer

Tudy of the Compatibility and Properties of PBT/PC Blends

Effect of addition of compatibilizer on mechanical, thermal and thermo-mechanical behavior of a polymer blend (PBT/ PBT(G)/ PTT) composite

Compatibilization in Ionomer Blends

Effect of Addition of Pp-G- (Gma-Co-st) on Morphologies and Properties of Pbt/Pp Blends

Poly(ε-Caprolactone)/Poly(Lactic Acid) Blends Compatibilized by Peroxide Initiators: Comparison of Two Strategies

Compatibilizing modification of polyethersulfone/polycarbonate blend

Preparation and Characterization of Poly(butylene Succinate-Co-adipate)/poly(lactic Acid) Blends with Enhanced Compatibility, Mechanical Properties, and Heat Resistance

Enhancing the properties of PBAT/PLA composites with novel phosphorus-based ionic liquid compatibilizers

Molecular Compatibility of Polyamide 6 Blending with Thermal Liquid Crystalline Polyamide

Compatibilization And Toughening Of Immiscible Ternary Blends Of Polyamide 6, Polypropylene (Or A Propylene-Ethylene Copolymer), And Polystyrene

Influence of Methyl Methacrylate-Co-glycidyl Methacrylate Copolymers on the Compatibility, Morphology and Mechanical Properties of Poly(butylene Terephthalate) and Polycarbonate Blends

Morphology and Mechanical Properties of Nylon 6/PBT Blends Compatibilized with Styrene/Maleic Anhydride Copolymer

Crystallization, Structure and Significantly Improved Mechanical Properties of PLA/PPC Blends Compatibilized with PLA-PPC Copolymers Produced by Reactions Initiated with TBT or TDI

Investigations on the compatibilization between poly(lactic-co-glycolic acid)/poly(trimethylene carbonate) blends and poly(lactide-co-trimethylene carbonate)

Compatibilization and morphology development of immiscible ternary polymer blends