Abstract:This work numerically investigates the detailed combustion kinetics of partially premixed combustion (PPC) in a diesel engine under three different premixed ratio fuel conditions.A reduced Primary Reference Fuel (PRF) chemical kinetics mechanism was coupled with CONVERGE-SAGE CFD model to predict PPC combustion under various operating conditions.The experimental results showed that the increase of premixed ratio (PR) fuel resulted in advanced combustion phasing.To provide insight into the effects of PR on ignition delay time and key reaction pathways, a post-process tool was used.The ignition delay time is related to the formation of hydroxyl (OH).Thus, the validated Converge CFD code with the PRF chemistry and the post-process tool was applied to investigate how PR change the formation of OH during the low-to high-temperature reaction transition.The reaction pathway analyses of the formations of OH before ignition time were investigated.It was found that in the case of PR0%, the second isomerization from C7H14OOH2-4O2 to NC7KET24 and the decomposition of NC7KET24 contributed 27.6% and 46.46% of OH formation respectively.The contribution of AC8H16OOH-B to the formation of OH was just 12.13%.It can be concluded that the low temperature oxidation reactions of n-heptane were key steps in producing OH.While in the cases of PR30% and PR50%, because of the higher in-cylinder temperature, most of OH derived from the decomposition reaction of H2O2 that contributed 54.47% and 54.63% of OH formation respectively.Besides, in the PR30% and PR50%, the oxidation reactions of IC4H7 contributed 31.95% and 33.84% of OH formation respectively, and the oxidation reaction of IC4H6OH contributed 19.08% and 22.22% of OH formation respectively, which indicated that the oxidation of iso-octane also contributed to the production of OH.In addition, the distributions of mass fraction, production rate and representative creation reaction (RCR) of OH showed that in the case of PR30% and PR50%, the formation of OH outside the spray periphery were dominated by the reactions R394 (H2O2 (+ M) <=> 2 OH (+ M)), while that in the spray periphery were predominantly controlled by the reaction R21 (NC7KET24 => NC3H7CHO + CH3COCH2 + OH) and R125 (IC4H6OH + HO2 <=> CH2CCH2OH + CH2O + OH).Premixed fuel from port injection changed the formation pathway of OH during the oxidation of direct injection fuel through the reaction R125.

Effects of Octane Number and Premixed Ratio on the Knock and Combustion Characteristics of Dual-fuel SCCI

Combustion and Emission Characteristics of Stratified Charge Compression Ignition Fueled with Iso-octane/diesel Dual Fuel

An Experimental Study on the Combustion and Emissions Characteristics of Stratified Charge Compression Ignition Using Port-injection n-heptane and Direct-injection iso-octane

Study on Stratified Charge Compression Ignition Combustion of Isooctane/Diesel Dual Fuel

Influence of fuel supply timing and mixture preparation on the characteristics of stratified charge compression ignition combustion with N-heptane fuel

Octane Rating Effects of Direct Injection Fuels on Dual Fuel Hcci-Di Stratified Combustion Mode with Port Injection of N-Heptane

Effects of Research Octane Number of Gasoline and Dual Direct Injection Strategies on Combustion and Emission Performance of Intelligent Charge Compression Ignition (ICCI) Mode

Experimental Study on the Effects of Mixture Homogeneity on Stratified-Charge Compression Ignition Combustion

Evaluation of SCCI Potentials in Comparison to HCCI and Conventional DICI Combustion Using N-Heptane

Effect of Octane Number and Thermodynamic Conditions on Combustion Process of Spark Ignition to Compression Ignition Through a Rapid Compression Machine

Experimental Study On Homogeneous Charge Compression Ignition Combustion With Primary Reference Fuel

Experimental Study On Partially Premixed Compression Ignition Combustion Fueled With A Low Octane Number Primary Reference Fuel Using Two-Stage Fuel Supplying

Co-effects of Fuel Research Octane Number and Ethanol Injection Ratio on Dual-Fuel Spark-Ignition Engine

Experimental Study on the Effects of EGR and Octane Number of PRF Fuel on Combustion and Emission Characteristics of HCCI Engines

On Knocking Combustion Development of Oxygenated Gasoline Fuels in a Cooperative Fuel Research Engine

Effects of Inlet Pressure and Octane Numbers on Combustion and Emissions of a Homogeneous Charge Compression Ignition (HCCI) Engine

Numerical resolution of multiple premixed compression ignition (MPCI) mode and partially premixed compression ignition (PPCI) mode for low octane gasoline

Effects of Partitioned Fuel Distribution on Auto-Ignition and Knocking under Spark Assisted Compression Ignition Conditions

Numerical Investigation of the Combustion Kinetics of Partially Premixed Combustion (PPC) Fueled with Primary Reference Fuel

Optimizing Real Time Premixed Ratio of n-Heptane Compound HCCI Combustion

A Methodology for Stratified-Charge Preparation Via Low-Reactivity Fuel Multi-Injection Strategy in Intelligent Charge Compression Ignition (ICCI) Mode