Mineral melting behavior of chinese blended coal ash under gasification condition
Xiaojiang Wu,Tuo Zhou,Yushuang Chen,Zhongxiao Zhang,Guilin Piao,Nobusuke Kobayashi,Shigekatsu Mori,Yoshinori Itaya
DOI: https://doi.org/10.1002/apj.425
2011-01-01
Asia-Pacific Journal of Chemical Engineering
Abstract:The fusibility and mineral melting behavior of Chinese blended coal ash under gasification condition were studied by standard ash fusion temperature (AFT) test, X-ray diffraction (XRD), scanning electron microscope (SEM) and phase diagram theory. The experimental results show that the trend of blended ash's AFT is not linearly related to the blending ratios, but mirrors by changes in liquidus temperature from ternary phase diagram systems. The AFTs of those blended ashes whose main ash chemical compositions locate near the boundaries between two mineral regions or triple points are lower and change more evident than that of those blended ashes whose main ash chemical compositions are far away from the boundaries or triple points. With increasing mass fraction of low AFT ash in blended coal ash, the location of blended ash in ternary systems is changed from the mullite region to the anorthite region, as well as the dominant crystal mineral at deformation temperature (DT) is also transformed from mullite to anorthite via mullite-mullite and anorthite coexisting-anorthite. The fluxing minerals (anhydrite, wustite, albite, hercynite, augite) in low AFT ash can react with the refractory minerals (mullite, quartz) complicatedly to form new low-melting minerals (anorthite, hercynite, fayalite, gehlenite) at high temperature (HT) (1273-1403 K). These minerals can also interact to form eutectic mixtures in FeO-SiO2-Al2O3 and CaO-SiO2-Al2O3 systems and act as the most key factors for lowing melting mechanism of blended ash under gasification condition. (C) 2010 Curtin University of Technology and John Wiley & Sons, Ltd.