Abstract:Mineral behaviour for two individual coals (I, J) and their two-component coal blends and 800°C ash blends heating were studied. Ash samples were heated progressively from 800°C to IT (initial deformation temperature) at 100°C intervals under different conditions. Coal samples were heated from room temperature to the corresponding temperature. Mineral transformation at each temperature was determined by X-ray diffraction and SEM measurements. The results show that Si, Al, Fe and Ca compounds have a great form variation during heating. Their forms at different temperatures depend on the chemical composition of the ash, the blending ratio and the atmosphere. For different coal ashes, the main mineral matters at 800°C were quartz, anhydrite, hematite, calcite and feldspar. As the temperature increased, oxidation, thermal decomposition, transformation and reaction occurred between the components. Comparing a 40% I+60% J ash blend with individual ashes, fayalite was formed at 1100°C for the blend; the reaction product existed in a glassy phase at 1300°C. For a coal blend having the same ash ratio as the ash blend, FeO reacted with amorphous SiO2 or Al2O3 to form fayalite and hercynite at 1000°C. As the temperature increased to 1100°C, fayalite and hercynite increased obviously. At 1200°C, some iron inclusion compounds melted to become glassy phase matter. Compared with the ash blend, iron species undergo a different change during coal blend heating: fayalite and hercynite formed earlier, iron compounds melted to form a glassy phase at lower temperature. This may be caused by early combustion of the more reactive coal (J coal) in the blend inducing local variation in oxygen concentration gradients around the less reactive coal and consequently affecting the reaction atmosphere and Fe mineral behaviour and interaction. That is to say, for coal blends, the mineral transformation was affected by both the mineral species interaction and the combustion behaviour. The calculations were performed to examine the fate of mineral matter under different combustion conditions using a thermodynamic chemical equilibrium calculation program. Calculations from coal blends were comparable with experiments from ash blends, this is because the calculation program only considers the interaction among the mineral species but does not consider the combustion reaction. It indicates that combustion and the relative volatiles also affected the mineral behaviour and slagging during coal blend combustion. Meanwhile, the mineral species evaporations were measured at high temperature: the main evaporated species were Na, K pure species and compounds, Fe, FeO, SiO and SiO2. The evaporation of Fe has an important effect on initial deposition. Calculations were comparable with the experiments. Copyright © 1999 John Wiley & Sons, Ltd.

ASH MELTING BEHAVIOR AND MINERAL TRANSITION MECHANISM UNDER GASIFICATION CONDITION

Mineral melting behavior of chinese blended coal ash under gasification condition

Effect of Chemical Compositions on Ash Fusibility Characterization of a Jincheng Anthracite During Combustion and Gasification

Ash Fusion Characteristics and Mineral Evolvement of Blended Ash Under Gasification Condition

Main Mineral Melting Behavior And Mineral Reaction Mechanism At Molecular Level Of Blended Coal Ash Under Gasification Condition

Ash Melting Behavior During Coal Char-CO2/H2O Gasification Reaction

Experimental Study and Quantum Chemistry Calculation on Coal Ash Fusion Behavior and Related Mineral Evolution Mechanism

Study on Ash Fusion Process of Blended Coal by TG-DSC

The influences of mineral behaviour on blended coal ash fusion characteristics

Behavior of Mineral Matters in Chinese Coal Ash Melting During Char-Co2/h2o Gasification Reaction

Phase Transformation of Coal Ash at High Temperature Under Gasification Conditions and Iis' Influence on Viscosity

Quantitative analysis of minerals of blended coal ash at high temperature and its influence on slagging

Ash Fusion Regulation Mechanism of Coal with Low Melting Point and Different Ash Compositions

Study on behavior of minerals in blended coal ash during heating process

Effect of Coal Ash Composition on Ash Fusion Temperatures†

Behavior of Mineral Matters in Chinese Coal Ash Melting during char-CO<sub>2</sub>/H<sub>2</sub>O Gasification Reaction

Mineral Transformation During Combustion of Coal Blends

Fusion Characteristics at High Temperature of Low Temperature Ash and High Temperature Ash of Shenfu Coal

Ash fusion temperature and crystal composition of multi-component coal ash

Change of Ash Fusing Characteristic in Char Gasification

Mineral Conversion of Coal-ash in Fusing Process and the Influence to Ash Fusion Point