Abstract:Microporous refractories applied in the working-lining of metallurgical furnaces have been rapidly developed in recent years owing to the outstanding mechanical properties, thermal insulation performance and slag resistance, the pore structure of which plays a critical role in the variation of service performance. Meanwhile, the microporous magnesia aggregates were prepared in our previous research with the introduction of nano-sized particles to overcome the shortcomings of high thermal conductivity, poor thermal shock resistance and slag penetration resistance, however, the pore evolution during sintering still remains to be investigated. Hence, in this study, the pore evolution of microporous magnesia aggregates is explored specifically and the effect of nano-sized MgO on pore structure and sintering is simultaneously discussed. The sintering model of microporous magnesia was built for analyzing the pore structure evolution process. The results revealed that a micro-nano double-scale sintering model developed by the introduction of nano-sized MgO dramatically promoted the sintering kinetic force and boundary migration velocity. The sintering pressure discrepancy and free energy change per unit mole of specimens were respectively increased by ∼43 times and ∼48 times, which effectively improved the closed porosity and pore distribution homogeneity, while reduced the pore size. Meanwhile, the high sintering diving force lead to the significant improvement of direct bonding degree and grain size of microporous magnesia. With the addition of 3 wt% nano-sized MgO, the optimal sintering properties with closed porosity of 6.4%, bulk density of 3.23 g/cm3 and median equivalent pores diameters of 4.07 μm were achieved. The exploration of pore evolution in microporous magnesia aggregates contributed to the fabrication and industrialization development of microporous refractories.

Research on Size Distribution of Sinters with Different MgO Content

Effect of MgO content in sinter on the softening–melting behavior of mixed burden made from chromium-bearing vanadium–titanium magnetite

Influence of Calcining Temperature on the Mesopore Structures and Surface Fractal Dimensions of MgO-Al2O3-SiO2 Xerogels

On the Grain Size Distribution of MnO Doped ZnO Ceramics

Effect of W(mgo)/w(al2o3) Ratio and Basicity on Microstructure and Metallurgical Properties of Blast Furnace Slag

Effect of different MgO/Al2O3 ratios on microstructural densification, sintering process and mechanical property of MgAl2O4 materials

Effects of MgO doping concentration on densification and microstructure of flash sintered α-Al2O3 ceramics

Depolymerization mechanism of MgO on silicate microstructure under different CaO content: A theoretical and experimental study

Effect and Function Mechanism of Sinter Basicity on Softening-Melting Behaviors of Mixed Burden Made from Chromium-Bearing Vanadium-Titanium Magnetite

Effect of Sintering Atmosphere on Microstructures and Properties of Synthesized Microporous MgO Refractory Raw Material

Numerical analysis of multi-scale mechanical theory of microfine magnesite powder molding

Experimental Investigation and Numerical Modeling of Strength Properties of Iron Ore Sinter Based on Pilot-Scale Pot Tests and X-ray Computed Tomography

Effect of raw material composition on microstructures and properties of microporous MgO–Mg(Al, Fe) 2 O 4 refractory aggregates

Surface fractal dimension: An indicator to characterize the microstructure of cement-based porous materials

Effects of Sm2O3 addition on sintering behavior of pre-synthesized magnesia-rich magnesium aluminate spinel

Pore evolution of microporous magnesia aggregates with the introduction of nano-sized MgO

Room temperature Raman spectroscopy and 29Si MAS NMR combined with high temperature Raman spectroscopy and DFT calculation of xMgO-(1-x)CaO–SiO2 glasses and melts

Mechanical Behavior and Thermal Shock Resistance of MgO-C Refractories: Influence of Graphite Content

Understanding the Relationship Between Structure and Thermophysical Properties of CaO-SiO 2 -Mgo-al 2 O 3 Molten Slags

Unveiling the effect of MnO/SiO2 ratios on the viscosity and structure of mold fluxes for high-Mn cryogenic steels

Effect of stainless steel fibers on properties of MgO–C refractories