Intracavity frequency-doubled external-cavity surface-emitting blue laser with high conversion efficiency
Wu Yadong,Zhu Renjiang,Yan Ri,Peng Xuefang,Wang Tao,Jiang Lidan,Tong Cunzhu,Song Yanrong,Zhang Peng,,,,
DOI: https://doi.org/10.7498/aps.73.20231278
IF: 0.906
2024-01-01
Acta Physica Sinica
Abstract:Blue lasers with high power and high beam quality have many applications such as laser display, underwater communication and imaging, and non-ferrous metal processing. Optically pumped external-cavity surface-emitting laser combines the advantages of both surface-emitting semiconductor lasers and solid-state disk lasers, and can produce high output power and good beam quality simultaneously. Its high intracavity circulating power is more conducive to intracavity frequency doubling, achieving high-power and high beam quality blue light through fundamental laser in the near-infrared waveband. This paper reports an efficient intracavity frequency doubled 490 nm high power blue light using a 980 nm fundamental laser in an external-cavity surface-emitting laser. The V-type resonant cavity is formed by the high reflectivity distributed Bragg reflector (DBR) at the bottom of gain chip, a folded flat concave mirror (high reflectivity coated for 980 nm and anti-reflectivity coated for 490 nm), and a flat concave end mirror (high reflectivity coated for 980 nm and 490 nm). By inserting a nonlinear crystal LBO into the cavity at the beam waist formed by the folded mirror and end mirror, and employing a birefringent filter (BRF) to polarize the fundamental laser and narrow the linewidth of the laser, high power and high beam quality blue laser with high conversion efficiency is obtained. The effects of different factors including the length of nonlinear crystals, the linewidth of fundamental laser, and the compensation of walk off angle on the output power of the blue laser are experimentally studied. The length of the nonlinear crystal is optimized based on the size of the fundamental laser beam waist at the position of the crystal in the resonant cavity. Under the type I phase matching condition of LBO, over 6 W output power at 491 nm wavelength is obtained when the crystal length is 5 mm and the BRF thickness is 1mm. The beam quality M2 factors in both x and y directions are 1.08, and the conversion efficiency of frequency doubling is 63%. The experimental results also show that using symmetrically placed nonlinear crystals to compensate for the walk-off angle during frequency doubling can clearly improve the conversion efficiency of the frequency doubled blue laser.
physics, multidisciplinary