Abstract:In this study, the synthesis of multi-walled carbon nanotubes (MWCNTs) was carried out by chemical vapor deposition (CVD) using propane as the carbon source and Si as the catalyst support. The effect of CVD process variables such as temperature, choice of catalyst, etc on the growth behavior of nanotubes has been examined to understand the catalytic growth of CNTs. The transition metal catalysts, Fe and Ni, were used in both elemental metal form and in a metal complex form. In the case of elemental metal catalysts, the respective metals were deposited over the Si substrate using thermal evaporation following which nanotubes were synthesized by means of CVD. Subsequent studies of the synthesized carbon nanostructures employing elemental metal catalysts revealed a significant influence of the temperature and the catalyst material on the structure of CNTs. The CNTs synthesized using Ni catalyst were bamboo-like whereas the CNTs developed employing Fe catalyst were straight tubes with partial metal filling. Consequently, growth models for the different growth mechanisms have been proposed. Certain limitations of the above process have been overcome by employing spin-coating of a metal complex catalyst material on the Si substrate. The CVD synthesis of nanotubes using metal complex catalysts always resulted in partially catalyst filled CNTs. More importantly, the metal complex catalyst could be easily patterned on the Si substrate using spin-coating and photolithography, which resulted in site selective growth of partially catalyst filled MWCNTs. Since the entire process of site selective growth is suitable for conventional device fabrication, this method is a promising and practical pathway for large-scale fabrication of several magnetic material filled CNT-based devices.

Carbon Nanotubes/Sic Whiskers Composite Prepared by Cvd Method

Ni-W-P Catalyzed Growth of Carbon Nanotubes on SiC Whiskers

Carbide assisted in-suit growth and formation mechanism of SiC nanowires on the surface of defined carbon fibers

Industrial Synthesis of Whisker Carbon Nanotubes

Selective growth of semiconducting single-walled carbon nanotubes solely from carbon monoxide

Silicon Carbide Composites Deposited in Silicon Carbide Whiskers by Cvi Process

Preparation of in-situ grown carbon nanotubes via dithiocarbamate in composites with excellent microstructure and mechanical performance

Microfabrication And Characterization Of High Tensile Strength Sic Whisker-Reinforced Nickel Composite Coatings By Electrodeposition

Facile growth of oriented SiC nanowires arrays on carbon fiber cloth via CVD

Growth of carbon nanotubes on silicon carbide fabric as reinforcement for SiC/C composites

Synthesis and characterization of silicon carbide whisker arrays prepared by thermal evaporation method

Selective Growth of Carbon Nanotube on Silicon Substrates

Effect of Catalyst on the Preparation of Silicon Carbide Whiskers from Silica and Carbon

Preparation of Silicon Carbide Nanofibrils from Vapor Grown Carbon Nanotubes

Theoretical design and preparation of SiC whiskers catalyzed by Fe-oxides on carbon fibers

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Growth and Characterization of Multi-Walled Carbon Nanotubes using Chemical Vapor Deposition

In situ growth of CNTs on carbon fiber by chemical vapor deposition

The growth of multi-walled carbon nanotubes with different morphologies on carbon fibers

Mechanical properties and wear resistance of Cf / epoxy resin composites with in-situ grown SiC nanowires on carbon fibers