Abstract:New single‐polymer electroluminescent systems containing two individual emission species—polyfluorenes as a blue host and 2,1,3‐benzothiadiazole derivative units as an orange dopant on the main chain—have been designed and synthesized by Wang and co‐workers on p. 957. The resulting single polymers are found to have highly efficient white electroluminescence with simultaneous blue and orange emission from the corresponding emitting species. A single‐layer device has been fabricated that has performance characteristics roughly comparable to those of organic white‐light‐emitting diodes with multilayer device structures. New single‐polymer electroluminescent systems containing two individual emission species—polyfluorenes as a blue host and 2,1,3‐benzothiadiazole derivative units as an orange dopant on the main chain—have been designed and synthesized. The resulting single polymers are found to have highly efficient white electroluminescence with simultaneous blue (λ max = 421 nm/445 nm) and orange emission (λ max = 564 nm) from the corresponding emitting species. The influence of the photoluminescence (PL) efficiencies of both the blue and orange species on the electroluminescence (EL) efficiencies of white polymer light‐emitting diodes (PLEDs) based on the single‐polymer systems has been investigated. The introduction of the highly efficient 4,7‐bis(4‐( N ‐phenyl‐ N ‐(4‐methylphenyl)amino)phenyl)‐2,1,3‐benzothiadiazole unit to the main chain of polyfluorene provides significant improvement in EL efficiency. For a single‐layer device fabricated in air (indium tin oxide/poly(3,4‐ethylenedioxythiophene): poly(styrene sulfonic acid/polymer/Ca/Al), pure‐white electroluminescence with Commission Internationale de l'Eclairage (CIE) coordinates of (0.35,0.32), maximum brightness of 12 300 cd m –2 , luminance efficiency of 7.30 cd A –1 , and power efficiency of 3.34 lm W –1 can be obtained. This device is approximately two times more efficient than that utilizing a single polyfluorene containing 1,8‐naphthalimide moieties, and shows remarkable improvement over the corresponding blend systems in terms of efficiency and color stability. Thermal treatment of the single‐layer device before cathode deposition leads to the further improvement of the device performance, with CIE coordinates of (0.35,0.34), turn‐on voltage of 3.5 V, luminance efficiency of 8.99 cd A –1 , power efficiency of 5.75 lm W –1 , external quantum efficiency of 3.8 %, and maximum brightness of 12 680 cd m –2 . This performance is roughly comparable to that of white organic light‐emitting diodes (WOLEDs) with multilayer device structures and complicated fabrication processes.

White Electroluminescence from a Single‐Polymer System with Simultaneous Two‐Color Emission: Polyfluorene Blue Host and Side‐Chain‐Located Orange Dopant

Highly Polarized White-Light Emission from A Single Copolymer Based on Fluorene

White Electroluminescence from a Single‐Polymer System with Simultaneous Two‐Color Emission: Polyfluorene As the Blue Host and a 2,1,3‐benzothiadiazole Derivative As the Orange Dopant

Cover Picture: White Electroluminescence from a Single‐Polymer System with Simultaneous Two‐Color Emission: Polyfluorene As the Blue Host and a 2,1,3‐benzothiadiazole Derivative As the Orange Dopant (adv. Funct. Mater. 7/2006)

High Efficiency All Phosphorescent White Light-Emitting Diodes Based on Conjugated Polymer Host

Cover Picture: White Electroluminescence from a Single-Polymer System with Simultaneous Two-Color Emission: Polyfluorene as the Blue Host and a 2,1,3-Benzothiadiazole Derivative as the Orange Dopant (Adv. Funct. Mater. 7/2006)

White Electroluminescence from a Single-Polymer System with Simultaneous Three-color Emission

White Electroluminescence from A Single Polymer System: Improved Performance by Means of Enhanced Efficiency and Red-Shifted Luminescence of the Blue-Light-Emitting Species

White Electroluminescence from A Single Fluorene-Based Copolymer

White-Light Emission from A Single Polymer with Singlet and Triplet Chromophores on the Backbone

White Electroluminescence with Simultaneous Three-Color Emission from A Four-Armed Star-Shaped Single-Polymer System

Polymer white light-emitting diodes with a single emission layer of fluorescent polymer blend

Saturated and stabilized white electroluminescence with simultaneous three-color emission from a six-armed star-shaped single-polymer system

White Polymer Light-Emitting Diodes Based on Exciplex Electroluminescence from Polymer Blends and a Single Polymer.

Novel White Electroluminescent Single Polymer Derived from Fluorene and Quinacridone

Highly Efficient Pure-White-Light-Emitting Diodes from a Single Polymer: Polyfluorene with Naphthalimide Moieties

Efficient Single-Layer White Light-Emitting Devices Based on Silole-Containing Polymers

Efficient Polymer White-Light-Emitting Devices Based on Two Complementary Phosphorescent Colors

White Electroluminescence from a Phosphonate‐Functionalized Single‐Polymer System with Electron‐Trapping Effect

Stable White Electroluminescence from Single Fluorene-Based Copolymers: Using Fluorenone As the Green Fluorophore and an Iridium Complex As the Red Phosphor on the Main Chain

Efficient White‐Electrophosphorescent Devices Based on a Single Polyfluorene Copolymer