Abstract:As technology scales, the aging effect caused by Negative Bias Temperature Instability (NBTI) has become a major reliability concerns for circuit designers. Consequently, we have seen a lot of research efforts on NBTI analysis and mitigation techniques. On the other hand, reducing leakage power remains to be one of the major design goals. Both NBTI-induced circuit degradation and standby leakage power have a strong dependency on the input patterns of circuits. In this paper, we propose a co-simulation flow to study NBTI-induced circuit degradation and leakage power, taking into account the different behaviors between circuit active and standby time. Based on this flow, we evaluate the efficacy of Input Vector Control (IVC) technique on mitigating circuit aging and reducing standby leakage power with experiments on bench-mark circuits that are implemented in 90nm, 65nm, and 45nm technology nodes. The IVC technique is proved to be effective to mitigate NBTI-induced circuit degradation, saving up to 56% circuit performance degradation at 65nm technology node, and on average 30% circuit performance degradation across different technology nodes. Meanwhile, IVC technique can save up to 18% of the worst case leak-age power. Since leakage power and NBTI-induced circuit degradation have different dependencies on the input patterns, we propose to derive Pareto sets for designers to explore trade-offs between the life-time reliability and leakage power.

Input Vector Control for Leakage Power Minimization Based on Hybrid Genetic Algorithm

CMOS Combinational Circuit Leakage Power Reduction Using Genetic Algorithms

Leakage power reduction for CMOS combinational circuits

A Hybrid Genetic Algorithm with Critical Primary Inputs Sharing and Minor Primary Inputs Bits Climbing for Circuit Maximum Power Estimation

Power-aware Mapping Based-on Genetic Algorithm for Network-on-Chip

A Hybrid Reactive Power Optimization Algorithm Based on Improved Genetic Algorithm and Primal-dual Interior Point Algorithm

NBTI-aware Adaptive Minimum Leakage Vector Selection Using a Linear Programming Approach

Variation-aware gate sizing and clustering for post-silicon optimized circuits.

Study on leakage power estimation and reduction methodology of CMOS circuit

Leakage Power and Circuit Aging Cooptimization by Gate Replacement Techniques

MPGA: an Evolutionary State Assignment for Dynamic and Leakage Power Reduction in FSM Synthesis.

Gate Replacement Techniques For Simultaneous Leakage And Aging Optimization

AN IMPROVED GENETIC ALGORITHM FOR VECTOR OPTIMIZATION AND ITS APPLICATION TO DESIGN OPTIMIZATIONS OF ELECTROMAGNETIC DEVICES

Combined Novel Gate Level Model and Critical Primary Input Sharing for Genetic Algorithm Based Maximum Power Supply Noise Estimation

Genetic algorithm based fine-grain sleep transistor insertion technique for leakage optimization

A Layout Optimization Method to Reduce Commutation Inductance of Multi-Chip Power Module Based on Genetic Algorithm

NBTI and Power Reduction Using an Input Vector Control and Supply Voltage Assignment Method

A method in CMOS analog circuit optimization by genetic algorithm

NBTI and Leakage Reduction Using an Integer Linear Programming Approach

Min-cut Based Leakage Power Aware Scheduling in High-Level Synthesis

On the efficacy of input Vector Control to mitigate NBTI effects and leakage power