Abstract:The two-dimensional finite element microscopic model of NiCoCrAlY/YSZ gradient thermal barrier coating was established by using the representative volume element method to calculate the thermophysical properties of the gradient layer under different composition ratios. The parameter results were extended to the three-dimensional multi-layer solid model to study the thermodynamic properties of the double-layer coating and gradient structured coating under thermal cycling condition. The results show that the elastic modulus, Poisson’s ratio, coefficient of thermal expansion and thermal conductivity of the gradient layer are approximately linear with the component proportion of each phase, and the thermal conductivity is also affected by the distribution pattern of each phase. The thermal conductivity is low and the highest value is 2.91 W·m -1 ·K -1 when the proportion of NiCoCrAlY phase in the gradient layer is below 0.7 at room temperature. Compared with the double-layer coating, the proportion of YSZ in gradient coatings is reduced by 20%, the insulation temperature is reduced by 14%, the radial tensile stress, axial tensile stress, and shear stress of the ceramic surface layer at high temperature are reduced respectively by 47%, 32% and 37%, and the residual stress after cooling is reduced by 50%. The results are attributed that the gradient of the coating structure can effectively reduce the thermal mismatch stress caused by the difference in the thermal expansion coefficient between coating and substrate. According to the results of coating stress distribution, the coating is inclined to form vertical cracks in the centre region and horizontal cracks near the outer edge of the TC/BC interface.

Investigation on Hot-Fatigue Behaviors of Gradient Thermal Barrier Coatings by EB-PVD

Different Growth Mechanisms of Alumina on the Surface of NiPtAl and MCrAlY Bondcoatings in EB-PVD TBC System

Bonding and Thermal-Mechanical Property of Gradient NiCoCrAlY/YSZ Thermal Barrier Coatings with Millimeter Level Thickness

Characterisation and Oxidation Behaviour of Plasma Surface Alloyed on Γ-Tial Alloy

Study on Performance of 8YSZ Thick Gradient TBC

Gradient Thermal Cycling Behavior of a Thermal Barrier Coating System Constituted by NiCoCrAlY Bond Coat and Pure Metastable Tetragonal Nano-4Ysz Top Coat

Failure of Electron Beam Physical Vapor Deposited Thermal Barrier Coatings System under Cyclic Thermo-Mechanical Loading with a Thermal Gradient

Microstructure and Thermal Cycling Behavior of Thermal Barrier Coating on Near-Α Titanium Alloy

Analysis On Stress Distribution Of Thermal Barrier Coating System With Thermal Gradient Mechanical Fatigue

Thermal fatigue degradation of an overlay coating

Study of Failure of EB-PVD Thermal Barrier Coating Upon Near-Α Titanium Alloy

Microstructural Design and Thermal Cycling Performance of a Novel Layer-Gradient Nanostructured Sc2O3–Y2O3 Co-Stabilized ZrO2 Thermal Barrier Coating

Preparing and Study of EB-PVD Thermal Barrier Coatings on Titanium Substrates

Finite Element Simulation of Thermodynamic Properties of NiCoCrAlY/YSZ Gradient Coating

Failure Characteristics and Life Prediction for Thermally Cycled Thermal Barrier Coatings

Experimental Investigation on High-Temperature Fatigue and Fracture Properties at the Interface Between Thermal Barrier Coatings (tbcs) and Nickel Based Superalloy Substrate

Thermomechanical and Thermal Gradient Mechanical Fatigue Lifetime of Thermal Barrier Coating Systems

Study on gradient structure and interface mechanical properties of n–8YSZ/AlCoCrFeNi high–entropy coatings

Thermal cycling of EB-PVD TBCs based on YSZ ceramic coat and diffusion aluminide bond coat

Performance of 2024 aluminum alloy thermal barrier coating systems subjected to elevated temperature fluctuation as a fatigue

Effects of a nano carbide coating fabricated by EB-PVD on the interfacial stability of aluminide coated superalloy