Abstract:The attainment and maintenance of a low temperature environment is essential for aerospace cryogenic detectors to achieve their required performance. Developing cryocoolers with features of high efficiency, compact structure, and long lifetime is the main challenge for cryogenic detector cooling. In this paper, a high efficiency thermally-coupled two-stage Stirling type pulse tube cryocooler working at 35 K for HgCdTe long wave infrared detector cooling is designed and tested. The thermally-coupled type avoids gas distribution at cold side which minimizes the inter-stage influence. The whole cryocooler is driven by one linear compressor which enables compact structure. The influence of operation frequency and mean pressure is studied by numerical calculation and experiments to determine the optimum operation condition. Acoustic impedance characteristics of both stages and the whole cold finger are also analyzed by comparing performance of cryocooler with different frequency, mean pressure and structure dimensions. The distributions of acoustic power and phase angle are presented to study the relation between impedance characteristic and the cooling performance. Impedance match between compressor and cold finger is also discussed by analyzing the efficiency of the linear compressor and the performance of cryocooler with different pulse tubes. Under optimum impedance match and operation condition of a working frequency of 39.2 Hz and a mean pressure of 2.45 MPa, the cryocooler provides a cooling power of 1 W at 35.1 K with an input electrical power of 150 W, which indicates a relative Carnot efficiency of 5%. This is a rather high efficiency for developed Stirling type multi-stage pulse tube cryocooler working at 35 K with only inertance tubes as phase shifter. The development of this cryocooler lays a solid base for the further optimization to realize a competitive candidate for aerospace cooling requirements.

Cryogenic system for space infrared astronomy observatory

Application of Superfluid Helium Cryogenic System in Space Infrared Astronomy Observation

Development of cryogenic system for James Webb Space Telescope

Passive cryogenic system for cooling a geostationary satellite

Status and Development Trends of Space Mechanical Refrigeration System at Liquid Helium Temperature

Co-designing Cryogenic System with Pulse Tube Cryocooler and Loop Heat Pipe for Infrared Energy Management

State-of-the-art Development about Cryogenic Technologies to Support Space-Based Infrared Detection

A Two-Stage Thermally-Coupled Pulse Tube Cryocooler Working at 35 K for Space Application

Cryogenic Performance of the Space Infrared Optical Payload

Cryogenic technology for infrared detection in space

Essential Improvement of the JT Cryocooler Working at Liquid Helium Temperature for Space: Efficient and Lightweight

Recent Advances in Cryogenic Optics Technology for Space Infrared Telescope and Interferometer Systems

A Miniature Liquid Helium Temperature JT Cryocooler for Space Application

Optical system of the Infrared Telescope in Space

The Influence of the Space Cryogenic Environment on Space Payload

The study on cryogenic capture of the thin air in Near Space

Cryogenic cooling with cryocooler on a rotating system

Design and Study on Mechanical and Thermal Properties of the Cryostat for High Sensitivity Terahertz Detection Module

Development of Cryogenic Systems for Astronomical Research

Design Of Optical System For Infrared Scene Projection In Cryogenic Environment

Design and Experimental Investigation of a Cryogenic System for Environmental Test Applications