Abstract:Structural Health Monitoring, Ahead of Print. Acoustic emission (AE) technology is suitable for monitoring the status of high-speed train bearings owing to its high sensitivity and real-time dynamic monitoring capabilities. However, a complete theoretical model of the AE sensor, which is the core component of AE signal sensing equipment, has not yet been reported. The existing matching layer models do not account for wave attenuation in the matching layer. To address these shortcomings, we established a novel piezoelectric AE sensor design and modeling method. First, a rough contact model is established for piezoelectric ceramics, and the influence of roughness on size selection of piezoelectric ceramics is analyzed. Second, the sound intensity transmission coefficient (SITC) model of the matching layer is established considering the attenuation of AE waves, and the corresponding relationship between the attenuation coefficient and the optimum thickness of the matching layer is derived. Then a complete finite element (FE) model of an AE sensor is established, and the electroacoustic properties of the AE sensor are numerically simulated based on acoustic and piezoelectric coupling. Furthermore, AE sensors with different thicknesses of matching layers are constructed, and the validity of the mathematical model of the matching layer is verified through a lead-breaking experiment. Thereafter, a novel comprehensive performance evaluation index (CPEI) is designed through principal component analysis (PCA) based on hit parameters of AE sensors. Finally, the effectiveness and environmental adaptability of the AE sensor is verified by performance testing under complex conditions near an actual high-speed train line. The proposed method can provide a valuable theoretical framework for AE sensor design and status monitoring of high-speed train bearings.

Study on the Characteristics of Acoustic Emission Signals of Slider-disk Contact

Study of the Power Spectrum of Acoustic Emission (AE) by Accelerometers in Fluidized Beds

Study on the Propagation Characteristics of Acoustic Emission in Point Contact Bearing Ball

Detection of Liquid Atomization Status Using Acoustic Emission Method

Experimental investigation on acoustic emission in fretting friction and wear of bolted joints

Acoustic Emission and Its Relationship with Friction and Wear for Sliding Contact

Quantitative Relationship Between Sliding-Generated Acoustic Emission and Friction Conditions at Bolted Joint Interfaces

Experimental Study of the Slider-Lube/Disk Contact State and Its Effect on Head-Disk Interface Stability

Experimental Study on Condition Diagnosis of Sliding Bearings Based on Acoustic Emission Detection

The relationship between acoustic emissions and wear particles for repeated dry rubbing

Experimental Study on Rubbing Acoustic Emission for Rotor-Bearing System Based on Parameter Analysis

Study on the Friction Behavior and Abnormal Conditions of Non-contact Mechanical Seal Based on Acoustic Emission

Acoustic Emission Characterization of Damage Patterns in Composite Scarf Joints Using Unsupervised Learning

Sliding wear studies using acoustic emission

Application Of Acoustic Emission Technique In Diagnostics Of Early Rubbing Fault

Wear monitoring of bearing steel using electrostatic and acoustic emission techniques

Acoustic Emission Detection of Particle Movement in A Cross-Flow Moving Bed

Predicting the coefficient of friction in a sliding contact by applying machine learning to acoustic emission data

Development of the High-speed Sliding-rolling Contact Friction Testing Machine

A novel acoustic emission sensor design and modeling method for monitoring the status of high-speed train bearings

Modal Analysis of Rubbing Acoustic Emission for Rotor-Bearing System Based on Reassigned Wavelet Scalogram