Abstract:Micro-alloying magnesium (Mg) alloys by rare earth elements is an efficient method for enhancing their mechanical properties. This work adds minor Yb (0.1, 0.3, 0.5 wt%) into Mg-4.0Zn-1.5Mn alloy to investigate the grain structure, second phase, and mechanical properties variation. The results illustrate that the grain is refined and the basal texture is weakened by adding Yb element. The addition of Yb to the Mg-4.0Zn-1.5Mn alloy forms the YbZn11 phase, as well as Yb-containing particles enriched with Zn and Mn elements. The presence of Yb-containing phases prevents the occurrence of the MgZn2 and α-Mn phases. Moreover, a segregation region of Zn atoms is also formed near the grain boundaries. The addition of minor Yb to the Mg-4.0Zn-1.5Mn alloy leads to a synergistic improvement in the tensile yield strength (TYS), ultimate tensile strength (UTS), and fracture elongation (FE). The Mg-4.0Zn-1.5Mn-0.5 Yb alloy exhibits excellent mechanical properties, specifically a TYS of 289 MPa, UTS of 334 MPa, and FE of 21.9%. The strengthening mechanism primarily arises from three factors: grain boundary strengthening, second phase strengthening, and the Zn atoms segregated at grain boundaries. After adding Yb, the multiple slip systems are activated, especially the prismatic <a> slip and pyramidal <c+a> slip. The activated slip systems collaborate efficiently to control the plastic deformation, leading to an increased work-hardening ability. Consequently, simultaneous enhancement in both strength and ductility is achieved.

Effect of Yb Addition on Strength and Fracture Toughness of Al-Zn-Mg-Cu-Zr Aluminum Alloy

Improving mechanical properties of Mg–Zn-Nd-Zr alloy by low alloying with Yb and corresponding strengthening mechanisms

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Effect of combined addition of Zr, Ti and Y on microstructure and tensile properties of an Al-Zn-Mg-Cu alloy

Synergistic enhancement of strength and plasticity in Mg-4.0Zn-1.5Mn magnesium alloy by minor Yb addition

Effect of yttrium addition on dynamic mechanical properties, microstructure, and fracture behavior of extrusion-shear ZC61 + xY (x = 0, 1, 2, 3) alloys

Effect of Y on Age Hardening Response and Mechanical Properties of Mg-xY–1.5LPC −0.4zr Alloys

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Effects of yttrium additions on microstructures and mechanical properties of cast Al-Cu-Mg-Ag alloys

Effects of Zr+Er and Zr+Y on Microstructure and Tensile Properties of Al-Mg-Si-Cu-Mn-Cr Alloys

Effect of yttrium on phase composition and microstructure of FeCoNiAlCrB high entropy alloys

Balancing the fracture toughness and tensile strength by multiple additions of Zr and Y in Nb–Si based alloys

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Effect of Yttrium Addition on Microstructure and Mechanical Properties of Sr-Modified Low-Si Cast Aluminum Alloy

Metallographic Analysis of Cu–Zr–Al Bulk Amorphous Alloys with Yttrium Addition

The effect of zirconium on the microstructure and mechanical properties of a super-high-strength Al-Zn-Mg-Cu alloy

Improvement of Mechanical Properties and Corrosion Resistance of As‐Extruded Mg–2Zn–2Al–0.3Mn Alloy Through Y Addition

Effect of Ce and Y on Microstructures and Properties of Al-11.0Zn-3.1Mg-1.22Cu-0.1Sr-0.2Zr-0.1Ti Alloy

Microstructure and mechanical properties of cast Mg-6Gd–Zr alloy with different Y addition

Microscopic mechanism of mechanical property improvement of the casted Al-7Si-0.4Mg-0.3Y alloy

Effect of Y Alloying on Microstructure and Mechanical Properties of AZ61 Magnesium Alloy Sheets Applied as 3C Electronic Product Shells