Abstract:Thermo-mechanical Controlled Processing (TMCP) is one of the greatest achievements in steel industry in the 20th century, which, however, depends too much upon low temperature rolling for the refinement of austenite grains, causing great loss in terms of productivity. To overcome this disadvantage, a new processing route with ultra fast cooling as the core has been proposed, and pilot rolling and industrial trials were carried out. As compared to conventional accelerated cooling, the ultra fast cooling can achieve cooling rate up to 300°C/s for 3 mm thick strip and highly homogeneous cooling by the pressurized water spraying. In the present work, the metallurgical backgrounds for ultra fast cooling in thermo-mechanical processing were studied and elucidated. By the pilot hot rolling experiments with a lean composition of a typical 600 MPa grade high strength steel, it has been found that the application of ultra fast cooling (UFC) at the exit of hot rolling mills can improve the strength by as much as 100 MPa as compared to the conventional TMCP. The strengthening mechanism lies in that the ultra fast cooling immediately after hot rolling may further improve the strengthening effects by precipitation, grain refinement, and dislocation hardening. The theoretical calculations and experiments indicate that the grain refinement, dislocation hardening, and precipitation in the TMCP with in-front UFC have caused the strength increments of 36, 34 and 54 MPa over the conventional TMCP with ACC, respectively. The microstructure characterization showed that the density of high angle grain boundaries had been increased, and the average size of precipitates had been reduced from about 34 nm to 10 nm with the cooling pattern changing from ACC to the application of UFC. The theoretical estimation indicates that when the cooling profile is changed from the conventional ACC to UFC+ACC, and to UFC, precipitation strengthening accounts for more and more strength increment in the improved strength of hot rolled micro-alloyed steels.

Microstructural Characteristic of Low Carbon Microalloyed Steels Produced by Thermo-Mechanical Controlled Process

Effects of the titanium micro-alloying on the CG HAZ microstructure and toughness of the TMCP steels

Study on Microstructure and Mechanical Properties of TMCP-UFC-LT Treated Low Ni Steel

Microstructure and Properties of a Low Carbon Ti-V Microalloyed Steel

Microstructural evolution and grain refinement of a high strength low alloy steel produced by compact strip production

Microstructure Evolution In A Low Carbon Nb-Ti Microalloyed Steel

Variations in microstructure and mechanical properties along thickness direction in a heavy high strength low alloy steel plate

Microstructure Regulation and Mechanical Properties of Low-Carbon Multiphase Steels

Effect of Reheating and End Cooling Temperature on Microstructure Refinement in a Low Carbon High Strength Nb-Ti Microalloyed Dual Phase Steel

MICROSTRUCTURE, MECHANICAL PROPERTIES AND INTERPHASE PRECIPITATION BEHAVIORS IN V-Ti MICROALLOYED STEEL

Development of Ti–V–Mo Complex Microalloyed Hot-Rolled 900-MPa-Grade High-Strength Steel

Microstructures and Mechanical Properties of Hot-Rolled Nb-Microalloyed Trip Steels by Different Thermo-Mechanical Processes

Effect Of Controlled Cooling On Microstructure And Tensile Properties Of Low C Nb-Ti-Containing Hsla Steel For Construction

Microstructural Features Of A Ultra Low Carbon High Strength Acicular Ferrite Steel Thick Plate

Precipitation Strengthening of Micro-Alloyed Steels Thermo-Mechanically Processed by Ultra Fast Cooling

Thermomechanical Control Process of Low Carbon Bainite Microalloyed Engineering Steel

Effect of Process Parameters on Microstructural Evolution and Grain Refinement in a Low Carbon High Strength Microalloyed Dual Phase Steel

The Influence of the Hot-Rolling Temperature on the Microstructure and Mechanical Properties of Ti-Nb Microalloyed 21%Cr Ferritic Stainless Steel

Comparison of Novel 1 GPa Low‐Carbon, Low‐Alloyed Steel Produced with Simulated and Laboratory‐Scale Thermomechanical Controlled Processes

Influence of TMCP Parameters on Structure and Properties of Low Carbon Cu Bearing Ultra-High Strength Steel