Abstract:The study investigated the microstructure and mechanical properties of composite strengthened high-chromium cast iron by laser quenching and laser shock peening. Observation of microstructure, measurement of microhardness, residual stress and FWHM (full width at half maximum), impact toughness and wear tests were carried out on untreated, laser quenched, laser quench-laser shock peened high-chromium cast iron specimens. The research results showed that the laser shock peening will not produce new phases in high-chromium cast iron, and can further promote the transformation of retained austenite into martensite. The grains inside the laser quench-laser shock peened sample were obviously refined, and the carbides were uniformly dispersed. The laser quench-laser shock peened specimen produced large residual compressive stress and FWHM value on the surface, reaching -432.49 MPa and 2.124°, respectively. The problem of residual stress difference between the hardened zone and the transition zone caused by laser quenching was eliminated, and the tensile stress was all converted into compressive stress, which further increases the dislocation density and improves the micro-hardness. The impact toughness value of laser quench-laser shock peened specimen was 4.43 J/cm 2 , which was 16.27% higher than that of the untreated sample. The friction coefficient and wear rate were significantly reduced, and the wear scar was shallow and narrow, showing weak abrasive wear and oxidative wear, the impact toughness and wear resistance of high-chromium cast iron were improved. The results obtained from this study could be used as reference in future research and applications of laser strengthened high-chromium cast iron.

Experimental Research of Laser Shock Processing Brass

Numerical Simulation Research on Laser Shock Forming

Preliminary Studies on Strain Rate Dependence of Laser Shock Forming

Numerical Simulation Research on Laser Shock Forming of Thin Metal Sheet

Effects of laser shock processing on mechanical properties of AZ91 magnesium alloy

Experimental and numerical investigation on residual stress of 316L SS treated by different laser shock peening parameters

Laser shock peening on high-strength steel

Effect of laser shock peening on the retention ability of surface roughness in forged Cr5 steel

Effects of Laser Shock Processing on Morphologies and Mechanical Properties of ANSI 304 Stainless Steel Weldments Subjected to Cavitation Erosion

The Effect of Laser Shock Peening with and Without Protective Coating on Mechanical Properties of Surface of AZ31B

Effect of laser-shock peening on the structure and nano-mechanical behavior of a Ti-based metallic glass

Laser shock peening induced mechanical properties enhancement of 50CrVA alloy

Laser Shock Peening of Ti6Al4V Alloy with Combined Nanosecond and Femtosecond Laser Pulses

Experimental study on the pressure characteristics of laser-induced shock waves under different energy distribution

Optimization Of Residual Stresses Induced By Multiple Laser Shock Processing

Effect of laser shock peening on microstructure and mechanical properties of laser cladding 30CrMnSiNi2A high-strength steel

Effect of laser shock peening on tribological properties of magnesium alloy ZK60

Microstructure and mechanical properties of composite strengthened high-chromium cast iron by laser quenching and laser shock peening

Influence of pulse energy on surface integrity of AZ31 magnesium alloy processed by femtosecond laser shock peening

On the Microstructure, Residual Stress and Fatigue Performance of Laser Metal Deposited TC17 Alloy Subjected to Laser Shock Peening

The effect of laser shock processing on the microstructures and properties of 2060 Al Li alloys