Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

Performance of Resonant Charging Based on Pulse Transformer with a Magnetic Core

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

A Triggered Spark-Gap Switch for High-Repetition Rate High-Voltage Pulse Generation

Design and Performance Analysis of Multi-gap Multi-channel Spark Switch with LCR Triggered Method

Multiple-Gap Spark Gap Switch

A pulsed power generator with a 20 stage transmission-line-transformer and 20 spark-gap switches

Long Lifetime, Triggered, Spark-Gap Switch For Repetitive Pulsed Power Applications

A Repetitive Pulser with Four Spark Gap Switches

An Efficient, Repetitive Nanosecond Pulsed Power Generator with Ten Synchronized Spark Gap Switches

Synchronization of Multiple Spark-Gap Switches by A Transmission Line Transformer

Development of a Heavy Duty Pulsed Power Generator with Ten Spark Gap Switches

A High-Energy Spark Gap Switch and Trigger System

A Three-Electrode Gas Switch Triggered by Microhollow Cathode Discharge with Low Trigger Voltage

Trigger system of two-electrode gas spark switch

A high-energy graphite spark gap switch

Design and Performance of a Compact Marx Generator for Two-Electrode Gas Switch Used in ICF Power Conditioning System

Switching Impulse Generator Based on IGBT Triggering Control and Transformer Induction

500Kv Compact Repetitive Marx Generator

Optimization and Application of Multiple-Primary-winding Pulse Transformer

Design, Simulation, and Characterization of a Low-Cost In-Plane Spark Gap Microswitch with Dual-Trigger Electrode for Pulsed Power Applications.

Design and Performance of a Plasma-Jet Triggered Graphite Trigatron Switch