Abstract:Polyetherimide(PEI)/SiO2 composites were in situ prepared via sol-gel process in the presence of tetraethyl orthosilicate(TEOS) in a mixed solvent of N,N-Dimethylacetamide/tetrahydrofuran(DMAc/THF).Electronic microscopy was used to check dispersion quality in transmission mode and scanning mode,and the results showed that SiO2 particles could be uniformly dispersed in the composite under a certain amount(20 wt%) and the average size of the particles could be controlled within a compass of 80~300 nm.However,glomeration may occur if the concentration of SiO2 particles was beyond this range.Results of Differential scanning calorimetry(DSC) and thermogravimetric analysis(TGA) showed that the glass transition temperature(Tg) and decomposition temperature(Td) of PEI were improved by introducing SiO2 particles.The phase separation morphology of blends of 4,4′-diaminodiphenyl sulphone cured epoxy with PEI or PEI/SiO2composite was investigated by SEM and it showed that the introduction of SiO2 particles could reduce the size of the dispersion phase(PEI rich phase).Dynamic rheological measurement of epoxyresin(ER)/PEI/silica blends with different silica particle content was conducted at same isothermal temperature.The onset time of phase separation decreased as silica particles in the blend system increased because the silica particles could act as catalyst in the polymerization reaction and make the phase separation easier to occur.After that,the viscosity of system with higher particle concentration grew faster and made the phase separation process ends in an earlier stage.Dynamic mechanical thermal analysis(DMTA) and impact tests showed that using PEI/SiO2 as the modifier could enhance the modulus and toughness property of the epoxy resin system simultaneously.

Multi-step Sol–gel Process and Its Effect on the Morphology of Polyethylene Oxide (peo)/sio2 Anion-Exchange Hybrid Materials

Studies of polyhedral oligomeric silsesquioxane and polyhedral oligomeric silsesquioxane- polymer

Preparation of functional ethoxysilane-containing polyethylene through ethylene coordination copolymerization catalyzed by iminopyrrolide vanadium complex

Synthesis and characterizations of anion exchange organic–inorganic hybrid materials based on poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)

Synthesis and Characterizations of New Negatively Charged Organic–inorganic Hybrid Materials: Effect of Molecular Weight of Sol–gel Precursor

Macroporous Sio2 Monoliths Prepared Via Sol-Gel Process Accompanied by Phase Separation

Free-standing anion-exchange PEO–SiO2 hybrid membranes

Preparation of Organic-Silica Hybrid Monolith with Anion Exchange/Hydrophilic Interaction Mixed-Mode Via Epoxy–Amine Ring-Opening Polymerization Using Polyethylenimine as Functional Monomer

Preparation and properties of SiO2/PEG/PWA hybrid proton exchange membranes

The Role of Halloy Site on Crystallinity, Ion Conductivity, Thermal and Mechanical Properties of Poly(ethylene-Oxide)/halloysite Nanocomposites

Characterization of Sol-Gel Process in System WO_3-PEO

In Situ Preparation of Pei/Sio2 Composites and Their Modification for Epoxy Resin

The role of segmental mixing on the mechanical properties and oxidative stability of polydimethylsiloxane-based polyetherurethane

Novel Anion-Exchange Organic–inorganic Hybrid Membranes Prepared Through Sol–gel Reaction of Multi-Alkoxy Precursors

Macroporous MgO Monoliths Prepared by Sol–gel Process with Phase Separation

Novel Approach to Preparing Epoxy/Polyhedral Oligometric Silsesquioxane Hybrid Materials Possessing High Mass Fractions of Polyhedral Oligometric Silsesquioxane and Good Homogeneity

Pathway mediated microstructures and phase morphologies of asymmetric double crystalline co-oligomers

Fundamental studies of a new hybrid (inorganic–organic) positively charged membrane: membrane preparation and characterizations

Organic–inorganic crosslinked and hybrid membranes derived from sulfonated poly(arylene ether sulfone)/silica via sol–gel process

Robust Porous Organosilica Monoliths Via a Surfactant-Free High Internal Phase Emulsion Process for Efficient Oil-Water Separation.

Hybrid anion exchange hollow fiber membranes through sol–gel process of different organic silanes within BPPO matrix