Abstract:A k-epsilon-Theta-k(p) model was proposed to describe the complicated two-phase flow in downers, taking into account the fast and dense gas-solid flows in downers, transport phenomena caused by turbulence mechanism and collisions between particles, i.e., a k-epsilon turbulence model for gas phase, a k(p) turbulence model, and a kinetic theory description of solid stresses characterized by pseudo-temperature of particles (Theta) for solid phase. A FORTRAN code was developed to solve the steady-state 3D flow fields of two-phase flows numerically. To validate the reliability of the k-epsilon-Theta-k(p) model, the gas-solid flows in (1) the developing and fully developed regions of a downer (140 mm ID) and (2) solids jet development in the entrance region of a downer (92 mm ID) were simulated. The predicted results had satisfactory agreement with a large quantity of experimental data, i.e., axial and radial distributions of local solids fraction, local particle velocity, and pressure. In particular, the above model and corresponding simulations were also implemented successfully using CFX 4.2/4.3, a commercial software developed by AEA Technology Company. Furthermore, the CFX code was applied to predict the radial flow structure in a downer of 418 mm ID, which was validated by the ongoing experiments in the corresponding experimental setup. Further analysis of the simulated data also showed that the diffusion coefficient of particles is strongly correlated with the local solids fraction. A lower solids fraction corresponds to a larger radial diffusion coefficient. With the increase of solids fraction, the diffusion coefficient decreases sharply when the solids fraction is less than 0.05, and then levels off. This means that the local solids fraction has an important effect on the dispersion behavior of particles. This predicted result gives reasonable agreement with the experimental results in the literature.

Numerical Simulation of the Gas–particle Turbulent Flow in Riser Reactor Based on K–ε–kp–εp–θ Two-Fluid Model

Steady-state Simulation of Core-Annulus Flow in a Circulating Fluidized Bed (CFB) Riser

NUMERICAL SIMULATION OF GAS-SOLID TURBULENT FLOW IN RISER REACTOR--k-ε-kp-εp-Θ TWO-PHASE FLOW MODEL

Modeling of the Gas-Solid Turbulent Flow in a Riser Reactor

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Numerical Simulation of the Gas-Particle Flow in Risers - Ii: the Micro and Meso Flow Behaviors

Numerical Simulation on Gas-Solid Two-Phase Turbulent Flow in Fcc Riser Reactors (I) Turbulent Gas-Solid Flow-Reaction Model

CFD Simulation of Gas and Solid Flow Behavior in a Riser

Numerical simulation of gas-particle flows in a fluid catalytic cracking riser

THE APPLICATION OF THE DENSE GAS THEORY FOR THE NUMERICAL SIMULATION OF FCC RISER REACTOR

Numerical Simulation on Gas-Solid Two-Phase Turbulent Flow in Fcc Riser Reactors (ii) Numerical Simulation on the Gas-Solid Two-Phase Turbulent Flow

A Gas-solid two-phase flow-reaction model of FCC riser reactors and numerical simulation for them: I . Development of the gas-solid two-phase flow-reaction model

Computational fluid dynamic modeling of hydrodynamics in downer reactors

CFD simulation of hydrodynamics of gas-solid multiphase flow in downer reactors: Revisited

A gas-solid two-phase flow-reaction model of the FCC riser reactors and numerical simulation for them: II . Numerical simulation on the gas-solid two-phase flow and reaction of commercial riser reactors

CFD simulation of hydrodynamics in downer reactors

A computational fluid dynamics study on the flow field in a liquid–solid circulating fluidized bed riser

Simulation of Dense Gas-particle Flows in a Riser Using a Two-scale Second-order Moment Particle Turbulence Model

Two-Fluid Model Simulations of the National Energy Technology Laboratory Bubbling Fluidized Bed Challenge Problem

A two-scale second-order moment particle turbulence model and simulation of dense gas–particle flows in a riser