Abstract:Conventionally, micro-sized irregular polyaniline (PANI) particles were synthesized by dropwise addition of the ammonium persulfate (APS) solution into the aniline (ANI) solution with mechanical stirring. By replacing the mechanical stirring with an ultrasonic irradiation, PANI nanofibers in diameters of ∼50nm and lengths of 200nm to several micrometers were prepared. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) showed that at the early stage of polymerization, the polymers formed in both the mechanical stirred and ultrasonicated systems are in the form of nanofiber. However, with continuing of the reaction, these primary nanofibers grow and agglomerate into irregular shaped PANI particles in the mechanical stirred system, while in the case of the ultrasonic irradiation, the growth and agglomeration are effectively prevented, preserving thus the PANI nanofibers in the final product. By increasing the APS/ANI molar ratio from 0.5 to 2.5, the aspect ratios of the PANI nanofibers decreased. The PANI nanofibers exhibit higher solubility than the irregular shaped PANI particles. Although the yield, as well as the conductivity of the ultrasonic synthesized PANI nanofibers, was slightly lower than the irregular shaped PANI particles, the ultrasonic synthesis approach is one of the facile and scalable approaches in synthesizing PANI nanofibers in comparison with other ones without use of templates (e.g., the interfacial polymerization and rapid mixing polymerization). UV–Vis and Fourier transformed infrared (FTIR) spectra indicated ultrasound had no significant effect on the chemical structure of the PANI.

A Study on the Synthesis, Characterization and Properties of Polyaniline Using Acrylic Acid As a Primary Dopant. I: Polymerization and Polymer

Preparation of Polyaniline Doped with Acid and Polymer Using Electrochemical Deposition

Study on Properties of Doped Polyaniline

Fabrication of one dimensional polyaniline nanofibers by UV-assisted polymerization in the aqueous phase.

Polyacetylene Nanoparticles-Based Preparation of Polyaniline Nanofibers

Preparation and characterization of polyaniline with high electrical conductivity

Study on structures and properties of organic acid doped polyaniline prepared by interfacial polymerization

The Preparation and Characterization of Polyacrylonitrile-Polyaniline (PAN/PANI) Fibers

An Analysis of Degradation and Stability of Polyaniline Doped with Three Common Industrial Acids

Synthesis and Properties of Polyaniline Nanostructures Using Different Ferric Salts

Preparation and Characterization of Polyaniline Micro/nanotubes with Dopant Acid Mordant Dark Yellow GG

Effects of Synthetic Conditions on the Structure and Electrical Properties of Polyaniline Nanofibers

Wormlike Acid-Doped Polyaniline: Controllable Electrical Properties and Theoretical Investigation

Nanoscaled Polyaniline Doped with Different Dicarboxylic Acids Based on Template-Free Method

Polyaniline with High Crystallinity Degree: Synthesis, Structure, and Electrochemical Properties

Enhanced adsorption of cationic and anionic dyes from aqueous solutions by polyacid doped polyaniline

Study on Property of Polyaniline In-Situ Synthesized from Multiple Sulfonic Acids Medium

Synthesis and Properties of Size Controlled Microrod Polyaniline Doped with Oleic Acid

Sonochemical Synthesis of Polyaniline Nanofibers

Potash alum doped polyaniline: Structure and properties

Synthesis of Highly Hydrophilic Polyaniline Nanowires and Sub‐Micro/Nanostructured Dendrites on Poly(propylene) Film Surfaces