Abstract:The onset of pitting on high purity and ultra high purity aluminum has been studied in the micrometer range by using a microelectrochemical cell in order to evaluate influences that induce localized corrosion. Microelectrochemical tests on polished samples of Al 99.999 and Al 99.9999 in 1 M NaCl showed that pitting at large areas occurred at several hundreds mV more negative than at small areas, suggesting that even very pure Al contains weak points. On rough surfaces weak points are more “activated” than on smooth surfaces. Locally measured pitting potentials of polished samples were shifted to more positive values than those measured on ground samples. Larger areas contain always small scratches, even on polished samples. Hence, the surface roughness showed a minor influence on the onset of pitting on larger areas. Microelectrochemical measurements performed on pure Al 99.99 with small amounts of copper showed that a copper content below 30 ppm is too small to have a beneficial or detrimental effect, whereas a copper content above 300 ppm probably leads to the formation of small inclusions or precipitations that acted as preferential corrosion initiation sites. A copper content around 100 ppm showed a beneficial effect on very small areas but not on larger ones. The onset of pitting on high purity and ultra high purity aluminum has been studied in the micrometer range by using a microelectrochemical cell in order to evaluate influences that induce localized corrosion. In 1 M NaCl we tested the influence of the surface roughness, of the size of the exposed area , and of small amounts of alloyed copper.

Nano-pit corrosion of the tabs in aluminum electrolytic capacitor: Polarization characteristics of the tabs in ethyleneglycol–borate solution with chloride ions

In Situ Transmission Electron Microscopy Study of Electrochemical Sodiation and Potassiation of Carbon Nanofibers

Effect of Pretreatment on the Pitting Corrosion of the Anode Foils for the Aluminum Electrolytic Capacitor

Anodic Behavior of Neodymium in Acidic AlCl_3-1-ethyl-3-methyl-imidazolium Chloride Ionic Liquid

Electrochemical noise features of pure aluminum during pitting corrosion in neutral NaCl solution

Microelectrochemical Studies of Pit Initiation on High Purity and Ultra High Purity Aluminum

Electrosorption Capacitance of Nanostructured Carbon-Based Materials

Effect of azelaic acid on microstructure evolution and electrical properties of anodic aluminum foil for electrolytic capacitor

Understanding Capacitance Variation in Sub-Nanometer Pores by In-Situ Tuning of Interlayer Constrictions.

Effect of Etch Conditions on Expanding Surface Corrosion of Anodic Foil for Aluminum Electrolytic Capacitors

Voltage oscillations during anodizing process of aluminum and their suppression

Characterizing metallization introduced polysilicon corrosion of surface micromachined structures with submicron capacitive gap

Electrochemical noises of LC4, LY12 and pure Al in NaCl solution

Effect of frequency and current density on A.C. etching of aluminum electrolytic capacitor foil

In-situ visualization of corrosion behavior of Al CoCrFeNi high-entropy alloys during electrochemical polarization

ELECTROCHEMICAL FEATURES OF THE CORROSION OF AN ALUMINUM-LITHIUM ALLOY IN 3.0% NaCl SOLUTION

The Electrochemical and Morphological Characteristics of Single Metastable Pit for 304 Stainless Steel under Potentiostatic Polarization

An assessment of pitting corrosion in anodized aluminum alloys: It might not be what it seems

Analytical model for ionic current dominated corrosion of nanoelectrodes in metalized films: Frequency and electric stress

Pitting Corrosion of Al2024-T3 in Sodium Chloride Solution

Electrochemical features during pitting corrosion of LY12 aluminum alloy in different neutral solutions