Abstract:In the actual industrial production process, the method of adaptively tuning proportional–integral–derivative (PID) parameters online by neural network can adapt to different characteristics of different controlled objects better than the controller with PID. However, the commonly used microcontroller unit (MCU) cannot meet the application scenarios of real time and high reliability. Therefore, in this paper, a closed-loop motion control system based on BP neural network (BPNN) PID controller by using a Xilinx field programmable gate array (FPGA) solution is proposed. In the design of the controller, it is divided into several sub-modules according to the modular design idea. The forward propagation module is used to complete the forward propagation operation from the input layer to the output layer. The PID module implements the mapping of PID arithmetic to register transfer level (RTL) and is responsible for completing the output of control amount. The main state machine module generates enable signals that control the sequential execution of each sub-module. The error backpropagation and weight update module completes the update of the weights of each layer of the network. The peripheral modules of the control system are divided into two main parts. The speed measurement module completes the acquisition of the output pulse signal of the encoder and the measurement of the motor speed. The pulse width modulation (PWM) signal generation module generates PWM waves with different duty cycles to control the rotation speed of the motor. A co-simulation of Modelsim and Simulink is used to simulate and verify the system, and a test analysis is also performed on the development platform. The results show that the proposed system can realize the self-tuning of PID control parameters, and also has the characteristics of reliable performance, high real-time performance, and strong anti-interference. Compared with MCU, the convergence speed is far more than three orders of magnitude, which proves its superiority.

Design of Fuzzy Self-Tuning PID Controller Based on Field Programmable Analog Array

Adaptive Fuzzy Pid Control For Polymerase Chain Reactions

An Self-adapting Fuzzy Control of Pump Controlled Motor System under Extreme Conditions

A Developed Method of Tuning PID Controllers with Fuzzy Rules for Integrating Processes.

Self-tuning-parameter Fuzzy PID Temperature Control in a Large Hydraulic System

Utrahigh Pressure Control Method Based on Fuzzy PID

Application of Mixed Parameter Self-Adjusted Fuzzy PID Control

Application of Self-tuning Fuzzy PID in Improvement of Dynamic Characteristics in Pump-Control-Motor System

Self-learning Fuzzy PID Controller Based on Neural Networks

Optimization of digital PID controller on hardware

The design of a temperature controller based on Fuzzy-PID technology

Application of self-adaptive fuzzy PI control in the air-conditioning system

The Parameter of Fuzzy Self-Tuning PID Controller Realized Based on VHDL

A Design of FPGA-Based Neural Network PID Controller for Motion Control System

A reconfigurable analog processor using coarse-grained, heterogeneous configurable analog blocks for field programmable mixed-signal processing

A Low Power Analog Integrated Fractional Order Type-2 Fuzzy PID Controller

Application Study of Fuzzy Immune PID Algorithm in Temperature Control System

Application of Fuzzy Single-neuron PID in Workshop Temperature Control System

Fuzzy Self-adaptive PID Control in Anti-surge Base on Hollsys System

Intelligent PID Controller Design with Adaptive Criterion Adjustment Via Least Squares Support Vector Machine

Design and Performance Analysis of Fuzzy-Pid Controller