Abstract:The multipath effect is a crucial error source caused by the environment around the station and cannot be eliminated or mitigated by differential algorithms. Theoretically, the maximum value for the carrier phase is a quarter the wavelength, i.e., about 4.8 cm for the GPS L1 signal. Considering the increasing demands of high-precision applications, the multipath error has become a major factor affecting the accuracy and reliability of GPS millimeter-level data processing. This paper proposes a multi-point hemispherical grid model (MHGM) to mitigate the multipath effect. In this method, the hemisphere centered on each station is divided into a grid, and the multipath error at the station is estimated based on the parameterization of the grid points. The double-differenced (DD) observed-minus-calculated (OMC) values on some previous days are treated as the observation values to model the present multipath error. Contrary to the present methods which rely much on the platform of data collection and processing, MHGM can be potentially applied to GPS data processing with the existing hardware and software. Experiments in high-multipath and low-multipath environments are designed by mounting a baffle or not. The experimental results show that MHGM is effective in mitigating the multipath effect. When using data from the previous day, an average improvement of about 63.3% in the RMS of DD OMC can be made compared with that without correction, and this is basically consistent with the sidereal filtering (SF) method which is 63.0%. Furthermore, the effectiveness of the above two methods is better than that of the empirical site model (ESM). The kinematic positioning results are also basically consistent with the statistical results of the RMS values of DD OMC. Historical data from more than one day can more explicitly and effectively model the MHGM. Furthermore, compared with the SF method, the MHGM can be used not only to mitigate the multipath error, but also to orientate the sources of the multipath error around the station, and give guidance in the physical elimination of these sources.

A Multipath Parameter Estimation Method of Weak GPS Signal

Multipath Parameters Estimation of Weak GPS Signal Based on New Colored Noise Unscented Kalman Filter

GPS Multipath Signal Estimation Method Utilizing Adaptive Filtering

A Frequency-Domain Multipath Parameter Estimation And Mitigation Method For Boc-Modulated Gnss Signals

A new multipath estimation method for GPS signals

A Tracking Method for Weak GPS Signals Using Dual Kalman Filters and Bayesian Estimation

Multipath mitigation of GPS signal based on improved EMD algorithm

A Subspace-based Spatial and Temporal Multipath Mitigation for Multi-antenna GPS Receiver.

A New Method for GNSS Multipath Mitigation with an Adaptive Frequency Domain Filter

A Multipath Reduction Algorithm Based on GPS/BDS Measurements

GPS Multipath Rejection through Multi-antenna

IMU Aided GPS Signal Parameters Estimation Method

Gps Multipath Mitigation Based On Improved Empirical Mode Decomposition

A New Method For Multipath Filtering In Gps Static High-Precision Positioning

A Multipath Estimation Algorithm Based on Extended Kalman Filter

A Novel Method For Mitigating The Gps Multipath Effect Based On A Multi-Point Hemispherical Grid Model

GPS Multipath Effect Processing Method Based on Augmented Parameters Kalman Filtering

A Fast & Precise Combined Algorithm for GPS Multipath Error Elimination

Subspace Based Joint Delay and Direction of Arrival Estimation for GNSS Multipath Signals

GPS Multipath and NLOS Mitigation for Relative Positioning in Urban Environments

BDS Multipath Parameter Estimation in the Presence of Impulsive Noise