Abstract:Thin-walled structures are widely used as typical high-efficiency energy-absorbing structures in crash safety protection. This paper aims to combine the characteristic of the square tube which concentrates energy dissipation through angle elements with the stable fold deformation of the circular tube, and innovatively propose a special-shaped thin-walled tube that contains both angle elements and arc elements. The failure behavior and energy absorption characteristics of the special-shaped tube were investigated by compression test and numerical simulation. The simulation results showed that the special-shaped thin-walled tubes have a significant advantage in energy absorption, and the specific energy absorption of the special-shaped tubes is 31.57% and 75.2% higher than that of the equal-mass circular and square tubes, respectively. Next, through finite element analysis, the effects of various parameters and initial imperfections on the crashworthiness of the special-shaped tubes were compared. The results indicated that adjustments to geometrical parameters significantly impact the energy absorption properties and crushing behavior of thin-walled tubes. Moreover, the tube with induced circular holes exhibited an optimal deformation mode. Further, a multi-objective optimal design of the metal special-shaped tube was carried out to obtain the best parameter configuration of the metal special-shaped tube. Finally, the special-shaped structure was extended to CFRP/AL hybrid thin-walled tubes. The failure behavior and energy absorption enhancement mechanism of the hybrid special-shaped tubes were investigated with experiments, and the absorbed energy of the hybrid tube was about 20% higher than the sum of the absorbed energy of the single constituent tubes. The effect of the CFRP lay-up pattern on the crashworthiness of the hybrid tube was investigated by numerical simulation, and it was found that the energy absorption capacity of the hybrid tube could be improved by appropriately increasing the number of layers and the proportion of axial fibers.

Experimental investigations of an energy Absorber based on thin-walled metal tube's plastic deformation

Experimental Study on a Plastic Deformation Energy Absorber Filled with Aluminum Foam in a Thin-Walled Metal Tube

Elasto-plastic impact model and experimental study of new absorber for structural collision protection

Study on improvement of prefolded energy absorption device to constant resistance and its mechanical properties

Experimental and theoretical study on an innovative energy absorption structure comprised of composite materials with necked‐down section subject to axial compressive load

Energy Absorption Behaviour Of An Aluminium Foam-Filled Circular-Triangular Nested Tube Energy Absorber Under Impact Loading

A Novel Efficient Energy Absorber with Necking-Expansion of Foam Sandwich Tubes

Comparative Study on Destructive Performance and Energy Absorption of Aluminum Tube by Simulation and Experiment

Experimental and Theoretical Study of Lateral Compression on Aluminum Foam-Filled Thin-Walled Metal Tubes

Experimental and Analytical Studies of a Novel Aluminum Foam Filled Energy Absorption Connector under Quasi-Static Compression Loading

Investigation of energy absorption characteristics of circular paper tubes under axial impact loading

Experimental, numerical and analytical studies on the aluminum foam filled energy absorption connectors under impact loading

Crushing of Energy Absorption Connectors with Polyurethane Foam and Asymmetric Pleated Plates

Experimental, numerical, and analytical studies on polyurethane foam-filled energy absorption connectors under quasi-static loading

Experimental Study on a Novel Steel-Pu Foam-Concrete-tube Multilayer Energy Absorbing Panel under Impact Loading

Experimental and numerical investigation of free inversion mechanism on spherical-capped multi-component circular tubes as energy absorbers

Crushing of a novel energy absorption connector with curved plate and aluminum foam as energy absorber

Anti-impact and Energy-Absorption of Metal and Compound Thin-Wall Cylindrical Tubes

A Novel Efficient Energy Absorber with Free Inversion of a Metal Foam-Filled Circular Tube

Crashworthiness analysis and optimization design of special-shaped thin-walled tubes by experiments and numerical simulation

Energy Absorption of Corrugated Multi-Cell Tubes under Axial Compression