Abstract:Raman fiber amplifiers (RFAs) have become increasingly important in optical communication systems and optical networks to compensate for the fiber loss and/or splitting loss. Comparing to the conventional rare-earth doped fiber amplifiers, RFAs have flexible signal gain band and low noise figure (NF) level [ 1].Recently, we reported an RFA with signal/pump double-pass the gain medium scheme by utilizing an optical circulator (OC) as a signal/pump reflector [7]. The experiments have successfully confirmed that the pumping efficiency improvement for this kind of RFA is more efficiency than other types of RFAs. What's more, the pumping efficiency improvement and the NF suppression can be realized simultaneously. Although it is crucial to numerically predict the characteristics of RFA such as signal power and noise figure (NF) versus pump wavelength, pump power, gain medium characteristic and so on, the optimum design of RFA parameters has not yet been addressed.In this paper, we preliminary describe the numerical simulation method based on a set of coupled steady-state equations to estimate the characteristics of signal/pump double-pass RFA. First we assume that the ASE level combines other noises is 30 dB lower than that of the input signal [8], so only the forward and backward signal/pump are considered. This is a typical boundary condition problem and Newton method is used. As we get the distribution of pump power and signal power along the DCF, the noise item at different frequency can be found by the relaxation method. After several iterations, all WDM channel signals and noise are convergent as predict. In this paper, in order to optimize the length of the DCF to get the best performance, we suggest a proper definition of NF called effective NF. During the simulation, the length of SMF is kept constant, so DCF length becomes the only dominant variable parameter to affect the gain and NF of the RFA. To verify the algorithm above, the parameters are set equal to those in Ref. [7], and the simulation results are in very good agreement with those of experimental data. To show the optimum DCF length under a fixed pump power and pump wavelength, we calculate results of both the signal output power and NF versus DCF length at three signal wavelengths. We find that the largest signal output power may appear at the length of DCF is 3.6 km, and the lowest NF could be found as the DCF length is 4 km. In general, DCF has a larger gain coefficient than that of the SMF, but the attenuation coefficient of the former is also higher than that of SMF. So, there is a trade-off when selecting the length of DCF. From the simulation results, we conclude that the optimum length of DCF is 3.8 +/- 0.2 km. DCF length of around 3.8 kin is an ideal value to realize the best characteristics for the RFA.

Theoretical Analysis of Raman Threshold of Fiber Raman Amplifier

Hybrid Rsoa and Fibre Raman Amplified Long Reach Feeder Link for Wimax-On-Fibre

A Flattening Gain Raman Amplifier Involved Only 2 Cascaded FBG Based Multi-Wavelength Pumps

Parameters Optimization of High Efficiency Discrete Raman Fiber Amplifier by Using the Coupled Steady-State Equations

Transmission Performance Analysis of Fiber Optical Parametric Amplifiers for Wdm System

Theoretical Analysis on Gain Characteristics of Ytterbium-Doped Fiber Amplifier

Influence of Bragg Reflection of Chirped Tilted Fiber Bragg Grating on Raman Suppression in High-Power Tandem Pumping Fiber Amplifiers.

6.85 Kw Ytterbium-Raman Fiber Amplifier Based on Adjustable Raman Threshold Method

Numerical Investigation of Raman-Assisted Four-Wave Mixing in Tapered Fiber Raman Fiber Amplifier

An Analytical Expression for the Impact of Rayleigh Scattering on Distributed Fiber Raman Amplifiers

Performance Analysis and Comparison of Bi-directionally Pumped Raman Amplifiers

Comparison Of Performance For Raman-Amplified Optical-Fiber Transmission Systems

Parameters Optimization of A High Efficiency Discrete Raman Fiber Amplifier

Design of Raman-Parametric Fiber Amplifier for Wavelength Division Multiplex Transmission System

Theoretical Study on Transverse Mode Instability in Raman Fiber Amplifiers Considering Mode Excitation

Design Gain Characteristic Of Dual-Pump Fiber Raman Amplifier

Analysis in Distributed Raman Amplification

Optimal Design and Analysis of Broadband Fiber Raman Amplifier

Characteristics of Fibre Bragg Gratings and Influences on High-Power Raman Fibre Lasers

Impact of Lump Defects in Transmission Fibers on the Performance of Distributed Fiber Raman Amplifiers

Linear Regression Method for Wide-Band Flat-Gain Fiber Raman Amplifier Pump Power Automatic Configuration