Abstract:Carbon black has always played a pivotal role in reinforcing elastomers because it remarkably improves the mechanical properties. The reinforcing effect of carbon black is influenced by its grades, which mainly depend on the difference in the structure of the carbon black particles. Despite many traditional experiments on the performance of carbon black composites, there has been less emphasis on reinforcement mechanisms due to the challenges associated with unraveling the intermolecular interactions. In this paper, a coarse grained molecular dynamics simulation was employed to examine the relationship between the morphology of the carbon black particles and the mechanical properties of the elastomer nanocomposites. Specifically, three different morphological carbon black nanoparticle models, including the smooth particle model, rough particle model, and the rough ellipsoid model, were constructed first. We then focused on investigating the changes of the mechanical properties by systematically varying the filling fraction of the carbon black particles, and the strength of the interfacial interaction between the filler and the rubber. The results indicated that the surface roughness and the filler's shape had a significant impact on the mechanical properties of the filled rubber models. The mechanical enhancement effect of the rough ellipsoidal carbon black is around 50–400% higher than that of the smooth carbon black, and the stronger the interfacial interactions, the more pronounced the enhancement. In addition, the rough ellipsoid filled system has low hysteresis, low permanent deformation, and high fatigue resistance. In general, this work explores the strengthening mechanism of carbon black on the elastomer at the molecular level and generates new insight into the design and fabrication of novel reinforcing fillers.

Simulation of Electrical Resistivity of Carbon Black Filled Rubber under Elongation

Simulation of Carbon Black Network in Filled Rubber

Numerical Modeling of the Electrical Resistivity of Carbon Black Filled Rubber

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

A Molecular Study on the Reinforcement of Polymethylene Elastomers

Investigation of the Carbon‐Black Network in Natural Rubber Under Cyclic Deformation

Characteristic Frequency of Carbon Black Filled Rubber

Three-dimensional numerical simulations on the hyperelastic behavior of carbon-black particle filled rubbers under moderate finite deformation

Experimental Investigation and Constitutive Modeling of Uncured Carbon Black Filled Rubber at Different Strain Rates

Finite viscoelasticity of filled rubbers: experiments and numerical simulation

Study of the Effect of Carbon Black Filling on the Mechanical Behavior of Rubber Hyper-Elasticity

From the Volume‐Filling Effect to the Stress‐Bearing Network: the Reinforcement Mechanisms of Carbon Black Filler in Natural Rubber

Microstructure effect analysis of carbon black-filled rubber composites

Imaging the Strain Induced Carbon Black Filler Network Structure Breakage with Nano X-ray Tomography

Microstructure Evolution and Strain Softening of Carbon Black Filled Natural Rubber Vulcanizates

TEST AND CALCULATION OF THE CARBON BLACK REINFORCEMENT EFFECT ON THE HYPER-ELASTIC PROPERTIES OF TIRE RUBBERS

Assessing robustness of hyperelastic models for describing nonlinearity of the mechanical response for pristine and swollen carbon black filled elastomers

Research on the Mechanical and Thermal Properties of Carbon-Fiber-Reinforced Rubber Based on a Finite Element Simulation

Molecular Dynamics Simulation of Effect of Carbon Nanotube Diameter on Properties of Crosslinked Epichlorohydrin Rubbers

Molecular dynamics simulation of the impact of the surface topology of carbon black on the mechanical properties of elastomer nanocomposites

The Effect of Carbon Black Morphology to the Thermal Conductivity of Natural Rubber Composites