Abstract:High current pulsed electron beam (HCPEB) is now developing as a useful tool for surface modification of materials. When concentrated electron flux transferring its energy into a very thin surface layer within a short pulse time, superfast processes such as heating, melting, evaporation and consequent solidification, as well as dynamic stress induced may impart the surface layer with improved physico-chemical and mechanical properties. This paper presents our research work on surface modification of steels and magnesium alloy with HCPEB of working parameters as electron energy 27keV, pulse duration ∼1μs and energy density ∼2.2J/cm2 per pulse. Investigations performed on carbon steel T8, mold steel D2 and magnesium alloy AZ91HP have shown that the most pronounced changes of phase–structure state and properties occurring in the near-surface layers, while the thickness of the modified layer with improved microhardness (several hundreds of micrometers) is significantly greater than that of the heat-affected zone. The formation mechanisms of surface cratering and non-stationary hardening effect in depth are discussed based on the elucidation of non-equilibrium temperature filed and different kinds of stresses formed during pulsed electron beam melting treatment. After the pulsed electron beam treatments, samples show significant improvements in measurements of wear and corrosion resistance.

Crater Eruption Induced by High Current Pulsed Electron Beam (HCPEB) Treatment

Evolution of Surface Microstructure of Cu-50Cr Alloy Treated by High Current Pulsed Electron Beam

Surface Modification of 316l Stainless Steel by High Current Pulsed Electron Beam - I. Selective Purification of Surface and Its Mechanism

Surface Modification of Cu–25Cr Alloy Induced by High Current Pulsed Electron Beam

Surface modification of 316L stainless steel by high current pulsed electron beam

Surface Treatment of Materials with High Current Pulsed Electron Beam

Surface Modification by High Current Pulsed Electron Beam

Low Energy High Current Pulsed Electron Beam (LEHCPEB) Treatment: an Effective Way for Improving Surface Microstructure and Properties

Surface Modification of Steels and Magnesium Alloy by High Current Pulsed Electron Beam

Surface Modifications of a Hyperperitectic Zn-10 Wt% Cu Alloy by Pulsed Electron Beam Treatment

Surface Modification of Cucr25 Alloy with Cr Coatings Treated by High Current Pulsed Electron Beam

Crater-Shaped Damages Bombarded by High Current Pulsed Electron Beams

Selective Surface Purification Via Crater Eruption Under Pulsed Electron Beam Irradiation

Analysis of Metals Surface Structure Modifications Induced by High Current Pulsed Electron Beam (HCPEB) under the “heating” and “melting” Modes

Low Energy High Current Pulsed Electron Beam Treatment for Improving Surface Microstructure and Properties

Microstructure Evolution Occurring in the Modified Surface of 316l Stainless Steel under High Current Pulsed Electron Beam Treatment

Formation and Evolution of Craters in Carbon Steels During Low-Energy High-Current Pulsed Electron-Beam Treatment

Mechanisms of nanostructure and metastable phase formations in the surface melted layers of a HCPEB-treated D2 steel

Microstructure and Properties of TiN/TiCN/Al2O3/TiN Coating Enhanced by High-Current Pulsed Electron Beam

Microstructure and Liquid Phase Separation of Cucr Alloys Treated by High Current Pulsed Electron Beam

Surface microstructure and property modifications in a duplex stainless steel induced by high current pulsed electron beam treatments