Abstract:One of the main challenges in designing catalysts for ammonia synthesis is to create active sites on the surface of the catalyst that prefers to reduce the strong N2 molecule despite its highly stable structure. Binary alloys have been demonstrated as potential ammonia synthesis catalysts in the literature. However, for binary alloys to be commercially viable, one needs to improve their catalytic activity for N2 reduction by strategically manipulating the several unique active sites present on their surface. Herein, by using computational tools, we created five different compositions of Cu x Ni1–x (0.5 ≤ x ≤ 0.9) alloys via special quasi-random structure (SQS) and genetic algorithm (GA). The alloy with about 50% of Cu and 50% of Ni is predicted to have the highest catalytic activity based on the shift of the d-band center toward the Fermi level. We then synthesized MgO-supported Cu0.5Ni0.5 nanoparticles and compared their activity for ammonia synthesis with that of Ni/MgO and Cu/MgO. It was found that the MgO-supported Cu0.5Ni0.5 alloy possesses 21 times higher activity than Cu/MgO and 3 times higher than Ni/MgO for ammonia synthesis, confirming the computational results. To demonstrate the impact of alloying on the catalytic activity, we further investigated all the possible unique sites on the surface of the Cu0.5Ni0.5 alloy for nitrogen reduction reaction (NRR) via density functional theory (DFT). The investigation of the 96 unique active sites on the Cu0.5Ni0.5 surface demonstrated that the position and concentration of Ni atoms near each investigated adsorption site have a linear correlation with the adsorption energy of the N2. Along with the structural and electronic properties of the active sites modified by Ni, orientation of the N2 molecule also plays an important role in determining the activity of the CuNi catalyst. These findings not only explained the notable increase in the activity of CuNi catalysts compared to the pure metals for NH3 synthesis but also offered critical insights required to tailor the specific surface environment of CuNi catalysts for NRR. This knowledge can serve as a foundation for further developments in designing binary alloy catalysts for sustainable ammonia synthesis.

Catalytic Decomposition of Ammonia over Nitrided Monx/Alpha-Al2o3 and Nimony/Alpha-Al2o3 Catalysts

Catalytic decomposition of ammonia over nitrided MoNx/α-Al2O3 and NiMoNy/α-Al2O3 catalysts

Modulation of Charge Distribution Enabling CuNi Nano-Alloys for Efficient Ammonia Oxidation Reaction to Nitrite Production

Ce0.6Zr0.3Y0.1O2 solid solutions-supported Ni Co bimetal nanocatalysts for NH3 decomposition

Role of cation in catalytic decomposition of ammonia over Ni supported zeolite Y catalysts

Ammonia decomposition over Ru and Ni catalysts supported on fumed SiO2, MCM-41, and SBA-15

Layered Double Hydroxides Derived Ni-X(Mgyalzon) Catalysts: Enhanced Ammonia Decomposition by Hydrogen Spillover Effect

Ni/La2O3 and Ni/MgO–La2O3 catalysts for the decomposition of NH3 into hydrogen

Ammonia partial cracking over low-cost Ni catalysts for enhancing combustion

Ammonia decomposition over Ni/La2O3 catalyst for on-site generation of hydrogen

Promoted Multimetal Oxide Catalysts for the Generation of Hydrogen Via Ammonia Decomposition

Effects of Organic Compounds on Ni/AlLaCe Catalysts for Ammonia Decomposition to Hydrogen

Ammonia Decomposition over Water‐Durable Hexagonal BaTiO3−xNy‐Supported Ni Catalysts

Catalyst Coatings for Ammonia Decomposition in Microchannels at High Temperature and Elevated Pressure for Use in Decentralized and Mobile Hydrogen Generation

Phyllosilicate-derived Ni catalysts with small nanoparticle size and strong metal-support interaction for efficient and robust decomposition of ammonia

NH3 decomposition for H2 production by thermal and plasma catalysis using bimetallic catalysts

Ammonia decomposition over vanadium oxide supported Ni catalyst for hydrogen production

Catalyst support effect on ammonia decomposition over Ni/MgAl2O4 towards hydrogen production

Long‐Term Stability of Ammonia Decomposition over Nickel‐Based Catalysts

Catalytic ammonia decomposition over Ni-Ru supported on CeO2 for hydrogen production: Effect of metal loading and kinetic analysis

Unraveling the Enhanced N 2 Activity on CuNi Alloy Catalysts for Ammonia Production: Experiments, DFT, and Statistical Analysis