Abstract:The opposed-piston free-piston linear generator exhibits considerable energy conversion efficiency; however, its operational dynamics are highly sensitive to key parameters owing to the elimination of mechanical limitations. In the present study, an analysis was conducted on the impact of significant system variables on the operating performance of the cold start-up process in conjunction with energy decomposition. At the same time, the operational boundaries of the cold start-up process were explored. A comprehensive thermodynamic model with a cold start-up process was established to predict the operation characteristics. The established model was verified through experimental data obtained from the stable operation of a prototype. The error between simulated cylinder pressure values and experimental observations was determined to be below 1 bar. The findings indicate that as the motor force and bounce energy ratio increased, there was a corresponding reduction in both the time and total energy input necessary to accomplish the cold start-up process. To achieve lightweighting and simultaneously reduce electrical energy consumption, it is advisable to decrease the piston mass by no more than 30 %. A comprehensive energy decomposition study revealed that friction loss accounted for the majority of total energy consumption. To optimize the cold start-up process of the opposed-piston free-piston linear generator, the motor force should be between 300 and 400 N, the bounce energy ratio between 9 and 11, and the piston assembly mass optimization range between −15 % and 15 %.

Analysis of Starting Process in Free-piston Engine-generator

Impact of the Piston Secondary Motion on Its Slap Force

Effect of key parameter on the energy consumption and start-up time in the cold start-up process of an opposed-piston free-piston linear generator

Study on Starting Phase of Hydraulic Free Piston Engine

Numerical Simulation on Operating Characteristics of Hybrid Compressed-air and Fuel Engine

Prediction and decision of free-piston linear generator on starting process for multi-fuel adaptability

Analysis and test of no-load pressure drop in an integrated hydrostatic-driven electric generator

58812 ANALYSIS OF THE PISTON/CYLINDER PAIR OF AXIAL PISTON PUMP BASED ON VIRTUAL PROTOTYPE(Fluid-Structure Interaction in MBS)

Performance Analysis of A 2-Stroke Micro Free-Piston Swing Engine

Analysis on Energy-Flow of a Bipropellant-Powered Hydraulic Free Piston Engine

Numerical Investigation on the Indicated Mean Effective Pressure and Integral Heat Release Rate Variations under Different Key Operating Parameters of a Spark‐Ignited Free Piston Engine Generator

Performance Characteristic of Permanent Magnet Linear Generator for Energy Conversion with Renewable Fuels on Free-Piston Engines

Study On The Starting Process Driven By Accumulator Of A Hydraulic Free Piston Engine

Free Piston Generator System Based on Model Predictive Control

Mathematical Model of Porting Parameters Design for a Novel Two-Stroke Micro Free-Piston Swing Engine

Research on Starting Process of a Hydraulic Free Piston Engine

Kinematic Analysis of Axial Piston Pump Based on Virtual Prototype

Analysis on operation characteristic and output performance of free piston expander-linear generator based on displacement control strategy

Experiment and Analysis of High Power Line-Start Pm Motor

A Generalized Method For Sub-Idle Modeling Of Aircraft Engines

Research on high fidelity modelling and optimum designing of an adaptive cycle engine's starting process