Abstract:Brillouin optical time-domain analysis (BOTDA) using distributed Brillouin amplification (DBA) only requires a milliwatt-level pump to achieve a sensing range beyond 100 km, which provides a powerful tool for temperature/strain sensing. However, similar to the majority of other long-range BOTDAs, the state-of-the-art reports require > 1000 times average, severely restricting the sensing speed. The blind area over tens of kilometers caused by the nonuniform Brillouin response and parasitic amplitude modulation (AM) are crucial factors affecting the signal-to-noise ratio (SNR). Here, a comprehensive performance optimization and substantial enhancement for BOTDA sensors was presented by the direct demodulation of an injection-locked dual-bandwidth probe wave. Injection locking (IL) can completely eliminate the impact of AM noise; dual-bandwidth probe enables self-adaptive pulse loss compensation, thereby intensifying the SNR flatness along the ultralong fiber, and direct probe demodulation can overcome nonlocal effects and allows ∼19.7 dB enhancement of probe input power. Therefore, using only 100 times average, ∼148.3 km sensing, and ∼5 m spatial resolution were achieved with < ∼0.8 MHz standard deviation of Brillouin frequency shift (BFS) over a broad range (∼131.7 km). The reduction in averages was more than 10 times that of the reported majority of long-range BOTDAs. Such performances were achieved without using time-consuming or post-processing techniques, such as optical pulse coding and image denoising. Because this approach is compatible with optical chirp chain technique without frequency sweeping, fast acquisition (0.3 s) was also realized, which has the potential for fast sensing at 3.3 Hz along a ∼150 km fiber.

Brillouin Optical Time Domain Analysis System Based on Raman Amplification and Semiconductor Optical Amplifier

Brillouin Optical Time Domain Analyzer Based on Bi-Directional Raman Amplification

Enhanced Sensing Performance in Long Distance Brillouin Optical Time-Domain Analyzer Based on Raman Amplification: Theoretical and Experimental Investigation

Influence of Optical Simple Pulse Coding on the Brillouin Optical Time Domain Analyzer Based on Bi-Directional Raman Amplification

Non-local effect in Brillouin optical time-domain analyzer based on Raman amplification

Vector Brillouin optical time-domain analysis with Raman amplification and optical pulse coding

Experimental demonstration on 2.5-m spatial resolution and 1 °c temperature uncertainty over long-distance BOTDA with combined Raman amplification and optical pulse coding

Theoretical Investigations on the Non-Local Effect in A Long-Distance Brillouin Optical Time-Domain Analyzer Based on Bi-Directional Raman Amplification

100 Km Brillouin Optical Time-Domain Reflectometer Based on Unidirectionally Pumped Raman Amplification

157km BOTDA with pulse coding and image processing

Optimization of long-range BOTDA sensors with high resolution using first-order bi-directional Raman amplification

154.4Km Botda Based on Hybrid Distributed Raman Amplifications

Towards fast sensing along ultralong BOTDA: flatness enhancement by utilizing injection-locked dual-bandwidth probe wave

A Time-Differential BOCDA Sensor Measurement System Applied to a 1 km Long SMF Using a Semiconductor Optical Amplifier as a Pump Chopper

Brillouin optical time-domain analysis enhanced by forward stimulated Brillouin scattering: proof-of-concept demonstration

Experimental Demonstration on 2.5m Spatial Resolution and 1oc Temperature Uncertainty over 74.6km BOTDA with Combined Raman Amplification and Optical Pulse Coding

Brillouin Optical Time Domain Analysis with Phase-Modulated Probe and Time-of-Flight Servo Loop

Bi-Directional Brillouin Optical Time Domain Analyzer System for Long Range Distributed Sensing

100 Km Brillouin Optical Time Domain Analyzer Based on Radom Distributed Feedback Fiber Laser Pumping

Ultra-long Dual-Sideband BOTDA with Balanced Detection

Brillouin Optical Time-Domain Reflectometry Based on Hadamard Sequence Probe Pulse