Abstract:Schematic illustration of poly(lactic acid) (PLA)/GLYMO‐modified hydroxyapatite (G‐HAp) composites preparation and interfacial crosslinking between PLA and G‐HAp. Poly(lactic acid) (PLA) is a biodegradable and bioactive thermoplastic polymer. It has been widely used for hard tissue applications in orthopedic and dental fields. However, PLA is not able to form a direct bond with bone and this limits its applications. Therefore, PLA and hydroxyapatite (HAp) composites have gained significant attention to improve PLA performance. However, agglomeration of HAp in PLA matrix due to unfavored interfacial interactions between PLA and HAp directly affects the mechanical properties and stability of PLA/HAp composites. In this study, 3‐(glycidyloxypropyl)trimethoxysilane (GLYMO)‐modified HAp particles (G‐HAp) were synthesized and then incorporated into the PLA matrix to prepare PLA/G‐HAp composites. PLA/G‐HAp composites were prepared by mixing G‐HAp at 50 wt% with PLA (10 wt% in chloroform) solution. The resulting mixture was dried, ground, and molded into cylindrical shapes by pressure, and cured under N2 atmosphere. The interface interactions of the obtained composites were elucidated by fourier transform infrared spectrometer (FTIR), scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses. It was observed that increased crosslinking density in the interface resulted in rougher surfaces. Thermal analyses demonstrated that Tg of PLA shifted to higher temperatures in parallel with crosslinking density. Additionally, Vicker's hardness tests and compression tests were conducted to determine the effect of interfacial crosslinking, and improved hardness and Young's modulus were observed. In the final part of study, MTT assay was carried out to evaluate cytotoxicity of composites and PLA/G‐HAp displayed higher cytocompatibility compared to conventional PLA/HAp composite. Highlights GLYMO modified HAp led to changes in the surface properties of composites. Increased crosslinking caused rougher surfaces for composites. Tg shifted to higher temperatures in parallel with GLYMO mediated crosslinking. Composites containing GLYMO‐modified HAp particles exhibited significant improvement in mechanical properties.

Interfacial fabrication and property of hydroxyapatite/polylactide resorbable bone fixation composites

Mechanical Properties and Degradation Properties in Vitro of Carbon Fiber Reinforced Hydroxyapatite/polylactide Composite

Molecular Modification of Hydroxyapatite to Introduce Interfacial Bonding with Poly (lactic Acid) in Biodegradable Composites

Improve the Strength of Pla/Ha Composite Through the Use of Surface Initiated Polymerization and Phosphonic Acid Coupling Agent

Synthesis and Properties of Composite Biomaterials Based on Hydroxyapatite and Poly(L-Lactide)

A comparative study on the in vivo degradation of poly(L-lactide) based composite implants for bone fracture fixation

Biological Efficacy of Modified Structure of Polymer Surfaces for Bone Substitute

Stereocomplexation Reinforced High Strength Poly(L-lactide)/Nanohydroxyapatite Composites for Potential Bone Repair Applications

Enhanced Cell Affinity of PHBHHx Composite Scaffold with Polylactide-Graft-hydroxyapatite As Compatibilizer.

Preparation and Properties of Nanocomposite of Poly(L-Lactide) and Surface Grafted Hydroxyapatite

Synthesis and Properties of A Compatibilizer for Composite Bone Repair Materials

Introduction of an Interface Layer on Hydroxyapatite Whisker/poly(l-Lactide) Composite and Its Contribution for Improved Bioactivity and Mechanical Properties

INTERFACE OBSERVATION OF HYDROXYAPATITE/POLY(DL-LACTIDE) COMPOSITES IMPLANTED INTO BONE TISSUE

Mineralization, degradation and osteogenic property of polylactide multicomponent porous composites for bone repair: In vitro and in vivo study

Fabrication and mechanical properties of PLLA/PCL/HA composites via a biomimetic, dip coating, and hot compression procedure

Preparation, in Vitro Degradability, Cytotoxicity, and in Vivo Biocompatibility of Porous Hydroxyapatite Whisker-Reinforced Poly(l-Lactide) Biocomposite Scaffolds.

Preparation and properties of polylactide/hydroxyapatite/polydopamine composites

Effect of surface modified hydroxyapatite on the tensile property improvement of HA/PLA composite

Modulation of mechanical and thermal properties of poly(lactic acid)/hydroxyapatite composites by interface crosslinking

Mechanical Properties and Bioactivity of Poly(Lactic Acid) Composites Containing Poly(Glycolic Acid) Fiber and Hydroxyapatite Particles

Phosphonic Acid Coupling Agent Modification of HAP Nanoparticles: Interfacial Effects in PLLA/HAP Bone Scaffold